C18 ACERT Tier 4 Interim / EU Stage IIIB

C18 ACERT Tier 4 Interim / EU Stage IIIB

Minimum Rating
600.0 bhp
Maximum Rating
755.0 bhp
Emissions
U.S. EPA Tier 4 Interim, EU Stage IIIB
Rated Speed
1900.0 RPM

Engine Specifications

Minimum Rating
600.0bhp
Maximum Rating
755.0bhp
Emissions
U.S. EPA Tier 4 Interim, EU Stage IIIB
Rated Speed
1900.0RPM
Bore
5.7in
Stroke
7.2in
Displacement
1104.5in3
Aspiration
Turbocharged-Aftercooled
Engine Weight, net dry
3482.0lb
Rotation (from flywheel end)
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 0 or SAE No. 1
Flywheel Teeth
136 (SAE 0), 113 (SAE 1)
Governor and Protection
ADEM A4
Minimum Rating
600BHP
Maximum Rating
755BHP
Emissions
U.S. EPA Tier 4 Interim, EU Stage IIIB
Rated Speed
1900r/min
Bore
5.7in
Stroke
7.2in
Displacement
1104.5in³
Aspiration
Turbocharged-Aftercooled
Engine Weight - Net Dry
3482lb
Rotation from Flywheel End
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 0 or SAE No. 1
Flywheel Teeth
136 (SAE 0), 113 (SAE 1)

Dimensions

Length
60.2in
Width
37.8in
Height
3482.0in
Length
60.2in
Width
37.8in
Height
3482in

Capacity for Liquids

Maximum Cooling System - Engine Only
7.1gal (US)

Standard Equipment:

  • Air Inlet System
    • Turbocharged Aftercooled
  • Control System
    • Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU) remote fan control
  • Cooling System
    • Vertical outlet thermostat housing, centrifugal water pump, guidance on cooling system design available to ensure machine reliability
  • Exhaust System
    • Clean Emissions Module (CEM) that includes Diesel Particulate Filter (DPF), Diesel Oxidation Catalyst (DOC), and Cat Regeneration System, optional exhaust outlet
  • Flywheels And Flywheel Housing
    • SAE 0 and SAE 1 flywheel housing
  • Fuel System
    • MEUI injection; primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming
  • Lube System
    • Open crankcase ventilation system, oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear driven), choice of sumps (front, rear, and center)
  • Power Take Off
    • SAE B and SAE C drives available, engine power can also be taken from the front of the engine on some applications
  • General
    • Paint: Cat yellow; vibration damper; lifting eyes

Optional Equipment: