801-974-0511

C32 ACERT Tier 2 Oilfield Diesel Generator Set

  • Home »
  • New Powers » C32 ACERT Tier 2 Oilfield Diesel Generator Set
    Order Parts Request Service

    C32 ACERT Tier 2 Oilfield Diesel Generator Set

    Email/Share
    Aspiration
    Turbocharged-Aftercooled
    Bore
    5.7 in
    Stroke
    6.4 in
    Displacement
    1959.0 in3

    Engine Specifications

    Aspiration
    Turbocharged-Aftercooled
    Bore
    5.7in
    Stroke
    6.4in
    Displacement
    1959.0in3
    Generator set control
    EMCP 3.1
    Generator
    SR4B
    Fuel system
    MEUI
    Generator Set Control
    EMCP 3.1
    Generator
    SR4B
    Fuel System
    MEUI
    Maximum Rating
    800 ekW (1000 kVA)
    Minimum Rating
    910 ekW (1300 kVA)
    Emissions/Fuel Strategy
    U.S. EPA Tier 2
    Manifold Type
    Dry
    Engine Control and Protection
    ADEM A4
    Frequency - Speed
    50/60 Hz (1500/1800 rpm)
    Aspiration
    Turbocharged-Aftercooled
    Bore
    5.7in
    Stroke
    6.4in
    Displacement
    1959in³

    Dimensions

    Length
    206.0in
    Width
    75.0in
    Height
    86.0in
    Weight
    20500.0lb
    Length
    206in
    Width
    75in
    Height
    86in
    Weight
    20500lb

    Capacity for Liquids

    Fuel
    Diesel

    Standard Equipment:

    • Air Inlet System
      • Dual element air cleaner
      • Service indicator
    • Cooling System
      • Radiator package mounted (50° C)
      • Coolant drain line with valve at edge of base
      • Coolant level sensor
      • Fan and belt guards
      • Coolant level sight gauge
      • Cat Extended Life Coolant
      • Metal top and bottom tanks
    • Exhaust System
      • Dry exhaust manifold
      • Flange outlets
    • Fuel System
      • Primary fuel filter with integral water separator
      • Secondary fuel filters
      • Fuel priming pump
      • Flex fuel lines
      • Fuel cooler
    • Generator
      • SR4B brushless
      • Self excited
      • Class H insulation
      • Form wound
      • IP23 protection
      • Cat DVR 3-phase sensing with selectable volts/Hz
      • 3 sensing CTs and one droop CT
      • Anti-condensation space heater
    • Generator Attachments
      • Bus bar - NEMA and IEC mechanicallug holes
      • Bottom cable entry; capable of top cable entry
    • Controls
      • ADEM A4 ECU
      • EMCP 3 Control Panel
    • Lube System
      • High efficiency oil filter
      • Oil drain valves
      • Fumes disposal
      • Gear-type lube oil pump
      • Deep sump oil pan
    • Mounting System
      • Steel base frame (skidable)
      • Anti-vibration mounts (shipped loose)
      • Designed welded base for increased durability (I-beam design)
    • Starting/charging System
      • 24-volt starting motor
      • 45-amp charging alternator
      • Battery rack
      • Battery disconnect switch
      • Oversized batteries
    • General
      • Paint — Caterpillar yellow except rails and radiators (gloss black)
      • Flywheel and flywheel housing — SAE No. 0

    Optional Equipment:

    • Air Inlet System
      • Air inlet adapters
      • Precleaners
    • Exhaust System
      • Stainless steel exhaust flex fittings
      • Elbows, flanges, expanders, and Y adapter
    • Generator
      • Permanent magnet excitation
      • Oversize and premium generators
    • Starting/charging System
      • Jacket water heater with shutoff valves
      • Battery chargers (10 amp)
    • Controls
      • EMCP 4.2 control panel
      • EMCP 4.3 control panel
      • Local or remote annunciator panel
      • Generator temperature monitoring and protection
      • Discreet I/O module
      • Load share module (optional with direct rack)