Cat® Motor Graders continue the Caterpillar tradition of being the industry standard in heavy construction, road building, and governmental applications. The 14 features a host of integrated technology solutions that increase operator efficiency, boost productivity levels and lower owning and operating costs. The 14 takes advantage of a larger engine, increased fuel efficiency, improved machine balance, enhanced transmission performance, more powerful telematics and added operator safety/convenience features.
Base Power (1st Gear) - Net 238 hp
Operating Weight - Typically Equipped 57250 lb
Blade Width 14 ft
Engine Model Cat C13
Base Power (1st Gear) - Net 238hp
Bore 5.1in
Displacement 763in³
Emissions Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
Engine Model Cat C13
Maximum Altitude - Full Power 13900ft
Maximum Altitude - Full Power (Tier 2) 12049ft
Maximum Altitude - Full Power (Tier 3) 14349ft
Maximum Torque - VHP Plus 1137lb/ft
Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Note (2) Optimized VHP Plus is standard for the 14M3.
Note (3) Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Note (4) Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)
Note (5) Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Number of Cylinders 6
Speed at Rated Power 1,850 rpm
Standard - Fan Speed - Maximum 1,600 rpm
Standard - Fan Speed - Minimum 550 rpm
Standard Capability 122°F
Stroke 6.2in
Torque Rise 41%
Gross Vehicle Weight - Base* - Front Axle 13994lb
Gross Vehicle Weight - Base* - Rear Axle 36994lb
Gross Vehicle Weight - Base* - Total 50980lb
Gross Vehicle Weight - Typically Equipped - Front Axle 15245lb
Gross Vehicle Weight - Typically Equipped - Rear Axle 42005lb
Gross Vehicle Weight - Typically Equipped - Total 57250lb
Note *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.
Operating Weight - Typically Equipped 57250lb
Arc Radius 16.3in
Blade Height - With Cutting Edge 24.9in
Blade Height - Without Cutting Edge 23in
Blade Width 14ft
Blade Width - With End Bits 169in
Blade Width - Without End Bits 164in
Throat Clearance 4.6in
Blade Tip Range - Backward 5°
Blade Tip Range - Forward 40°
Circle Centershift - Left 25.6in
Circle Centershift - Right 20.5in
Maximum Depth of Cut 23.3in
Maximum Lift Above Ground 16.5in
Maximum Shoulder Reach Outside of Tires - Left 73.6in
Maximum Shoulder Reach Outside of Tires - Right 78.9in
Moldboard Sideshift - Left 29.1in
Moldboard Sideshift - Right 31.1in
Circle - Outer Diameter 71.7in
Front Axle - Total Oscillation per Side 32°
Front Axle - Wheel Lean - Left/Right 17.1°
Circle Drive 1.8gal (US)
Cooling System 15.9gal (US)
Diesel Exhaust Fluid Tank (Tier 4 Only) 5.8gal (US)
Fuel Tank 109.9gal (US)
Hydraulic System 33gal (US)
Transmission and Differential 23.5gal (US)
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).
Standard and optional equipment may vary. Consult your Cat dealer for details.
Joystick, power adjustable armrests
Air conditioner with heater
Centershift pin indicator
Coat hook
Cup holder
Display, digital speed and gear
Doors, left and right side with wiper
Gauges (analog) inside cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
Gauges, machine level
Message display
Joystick gear selection
Joystick hydraulic controls for implements, steering, transmission
Ladders, cab, left and right side
Lights, left and right side lights
Lights, night time cab, LED
Meter, hour, digital
Mirror, inside rearview, wide angle
Power port, 12V
Radio ready, entertainment
ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
Seat, mechanical suspension, cloth
Storage compartments
Throttle control, electronic
Air cleaner, dual stage, dry-type radial seal with service indicator through messenger and dust ejector
Articulation, automatic Return-to-Center
Air-to-Air After Cooler (ATAAC)
Auto Diff Lock
Brake wear indication
Brakes, oil disc, four-wheel, hydraulic
Consistent power to ground
Monitoring system
Clutch, circle drive slip
Differential, lock/unlock*
Drain, engine oil, ecology
Demand fan, hydraulic
Engine ECO Mode
Ether starting aid
Fuel tank, ground level
Fuel-water separator
Hydraulic demand fan
Muffler, under hood (China Nonroad Stage III and Tier 3/Stage IIIA/Tier 2/Stage II equivalent)
Optimized VHP
Parking brake - multi disc, sealed, oil-cooled
Priming pump, fuel
Sediment drain, fuel tank
Three variations of the C13 engine. One meets Tier 4 Final/Stage V emission standards and is required for higher regulated countries. One meets Tier 3/Stage IIIA/China Nonroad Stage III standards, depending on emission standards of the specific country. One meets Tier 2/Stage II equivalent emission standards and is available for lesser or non-regulated countries, depending on standards of the specific country.
Transmission, 8F/6R, power shift, direct drive
Alternator, 150 ampere, sealed
Batteries, maintenance free, HD, 1,125 CCA
Breaker panel
Electrical system, 24V*
Belt, serpentine, automatic tensioner
Lights: reversing (LED), roof-mounted roading, stop and tail (LED)
Product Link
Starter, electric
Service lights, enclosure, rear, LED
Alarm, back up
Ground level engine shutdown
Hammer (emergency exit)
Horn, electric
Lockout, hydraulic implement for roading
Operator Not Present Monitoring system
Paint, glare reducing - top of front frame, rear enclosure and ripper cylinders
Seat belt, retractable 76 mm (3 in)
Secondary steering
Windows, laminated glass: Fixed front with intermittent wiper; Side and rear wipers (3)
Standard and optional equipment may vary. Consult your Cat dealer for details.
Air horn
Heated door
Mirrors high visibility
Mirrors, outside heated 24V
Mirrors, outside mounted
Seat, heated
Seat, heated/ventilated
Rearview camera
Seat belt indicator
Transmission, autoshift
Engine, compression brake
Cat GRADE with Cross Slope
Stable Blade
Advanced Control Joysticks
Auto Articulation
Debris guard
Front axle cylinder guards
Rear fenders
Sound suppression, engine enclosure and transmission
Transmission guard
Accumulators, blade lift
Fast fill fuel, 378.5 L/min (100 gal/min)
Metallic DCM wear strips
Light, LED, warning strobe
Lights, front headlights high
Lights, front headlights low
Mounting, for warning light
Working lights halogen
Working lights LED
Additional rearview camera and monitor
Machine security system key
Moldboard, 4.9 m (16 ft)
Heater, engine coolant, 120V
Heater, engine coolant, 240V
Hydraulic arrangements with additional hydraulic valves: Base +1, Base +3, Base +4, Base +5, Base +6
Product Link satellite, cellular
Rim, 431.8 mm x 635 mm (17 in x 25 in) MP (spare)
Snow wing, mounting frame ready
Fast fill
4.9 m (16 ft) blade with flat cutting edge 254 mm x 35 mm (10in x 1 3/8 in )
Push block, counterweight
Ripper, rear
Tooth, ripper
Coolant, -51 degrees C (-60 degrees F)
