3516C (HD) Well Stimulation Engine

3516C (HD) Well Stimulation Engine

Well stimulation operations in the oilfield are complex and demanding. The 3516C (HD) engine for well stimulation operations was specifically developed to reach the highest power nodes while meeting the highest standards in durability, reliability, and emissions. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. 3516C (HD) engines, with ratings: 2237-2461 bkW (3000-3300 bhp) @ 1900 rpm meet China Stage III and U.S. Non-road EPA Tier 2 equivalent emission standards. They are available using U.S. EPA and EU Flexibility, and for other regulated and non-regulated areas.

  • Maximum Rating 3300 BHP

  • Emissions EPA Non-Road Tier 2, IMO II and China Stage III

  • Displacement 3173 in³

  • Minimum Rating 3000 BHP

Request a quote

Product Specifications

Specifications

General Specifications

  • Aspiration Turbocharged-Aftercooled

  • Bore 6.7in

  • Displacement 3173in³

  • Flywheel Teeth 151

  • Flywheel and Flywheel Housing SAE No. 0

  • Maximum Rating 3300BHP

  • Minimum Rating 3000BHP

  • Stroke 7.5in

Emissions

  • Emissions EPA Non-Road Tier 2, IMO II and China Stage III

Dimensions

  • Height 73.3in

  • Length 111.3in

  • Weight 10590lb

  • Width 70.6in

Features

Equipment

Standard Equipment

  • Separate circuit aftercooler core — corrosion resistant coated (air side), air cleaner (single element w/service indicator)

  • Dual rear-mounted turbochargers

  • ADEM A3 ECU — LH

  • Electronic fuel injector fuel system (10 amp DC power required to drive electronic engine control unit)

  • Torque converter connections

  • Thermostats and housing, jacket water pump, gear-driven centrifugal

  • Connections for radiator cooling

  • Dual outlets: 88.9 mm O.D. (3.5 in) elbow hose connections

  • Separate Circuit Aftercooler (SCAC)

  • Exhaust manifold — dry, stainless steel bellows

  • Dual turbochargers with watercooled bearings

  • Exhaust outlet: 292 mm I.D. (11.5 in), 12-10.5 mm dia. holes EQ SP, 376 mm bolt hole dia.

  • Flywheel, SAE No. 0 — 151 teeth

  • Flywheel housing — SAE No. 0

  • Primary fuel filter

  • Fuel priming pump

  • Fuel filter — RH spin-on type

  • Fuel transfer pump

  • Electronically controlled unit injectors

  • No standard instrumentation

  • Optional, remote instrumentation available

  • Service meter

  • Crankcase breather — top-mounted

  • Oil cooler

  • Oil filler and dipstick — RH

  • Oil pump

  • Oil filter — RH spin-on type

  • Rear sump oil pan, 250-hour change interval

  • Oil pan drain valve — 3/4" NPT female connection

  • Trunion front support

  • Front housing — two-sided

  • ADEM A3 ECU system to provide customer-programmable engine deration strategies to protect against adverse operating conditions

  • Emergency stop logic inputs provided at 40-pin customer interface connection

  • Air inlet shutoff

  • Paint — Cat yellow

  • Vibration damper and guard

  • Lifting eyes

  • B-Series LAND

Optional Equipment

  • Air cleaner and air cleaner mounting

  • Remote air inlet adapters

  • Air inlet heater

  • Battery chargers

  • Charging alternators

  • Local speed throttle control

  • Throttle position sensors

  • Load sharing modules

  • Governor conversion

  • High gloss black folded core radiators

  • Coolant regulator conversion

  • Belt guard and radiator guard

  • Blower fan

  • Radiator cover

  • Fan drive and fan pulleys

  • Water level switch gauge

  • Coolant level sensors

  • Coolant conditioner

  • Expansion tank

  • Heat exchanger cooling conversion

  • Auxiliary water pump

  • Air separator

  • IMO Certification and European Union Certification

  • Flexible exhaust fitting

  • Elbows and flange

  • Flange and exhaust adapters

  • Manifold and mufflers

  • Flexible fuel lines

  • Fuel cooler

  • Water/fuel separator

  • Fuel level switch

  • Customer management device

  • Remote panel display and remote cylinder temperature display

  • Switches and contactors

  • Gauges and instrument panels

  • Fumes disposal

  • Oil pans

  • Prelube options

  • Sump pumps

  • Oil Filters

  • Base remova

  • Vibration isolators

  • Rails

  • Front housing

  • Flexible couplings

  • Coupling hub

  • Front accessory drives

  • Auxiliary drive shaft

  • Auxiliary drive pulleys

  • Front stub shaft

  • Damper guard removal

  • Pulleys

  • Flywheel stub shaft

  • Marine society conversion

  • Spray shielding

  • Shutoffs

  • Switches and contractors

  • Explosion relief valve

  • Sensors

  • Oil pressure monitor

  • Shutoff controls

  • Corrosion protection

  • Air starting motors — electric

  • Air pressure regulator

  • Air silencer

  • Hydraulic starter

  • Air start controls — manual, electric

  • Redundant start

  • Starting aids

  • Battery sets - 24V

  • Battery cable and battery rack