TKSA Sliding Axle
Cycling from transport to loading and back in just 61 seconds, the Trail King Hydraulic Sliding Axle is engineered for speed. The updated design offers easier maintenance, an increased swing clearance and more usable deck length. The SA features a low load angle, tons of corrosion protection and a smoother, more precise operation. Time is money, and this trailer will save you both!
Specifications
| STANDARD EQUIPMENT | TK80SA | TK110SA |
|---|---|---|
| Capacity | 80K lbs uniform, 50Klbs in 10 ft. | 110K lbs uniform, 70K lbs in 10 ft. |
| 3″ I-beam cross members | 12″ on center (8″ optional) | 8″ on center |
| 102″ wide | ✓ | ✓ |
| Perimeter Frame Gooseneck Design | ✓ | ✓ |
| 37” loaded deck height with 17.5 tires | ✓ | ✓ |
| 42” loaded deck height with 22.5 tires | ✓ | ✓ |
| 9′ upper deck | ✓ | ✓ |
| 14” kingpin setting with 86” swing clearance | ✓ | ✓ |
| Hydraulic sliding axles | ✓ | ✓ |
| Tilting main deck – forms a ramp to upper deck | ✓ | ✓ |
| 7 degree loading angle, 15 degree dump angle | ✓ | ✓ |
| Air Ride suspension | ✓ | ✓ |
| Air Ride raising/lowering control panel w/liquid-filled air gauge on upper deck | ✓ | ✓ |
| No traveling hydraulic lines for sliding axle operation | ✓ | ✓ |
| Side by side 2-stage cylinder, closed in travel position | ✓ | ✓ |
| Air and electrical lines contained in protective track | ✓ | ✓ |
| Single recessed winch roller at front of deck | ✓ | ✓ |
| Skid plate on slope of upper deck | ✓ | ✓ |
| Dual push/pull style lighted hydraulic valve controls with Kar-Tech remote (winch only) | ✓ | ✓ |
| Central located lube system for axles | ✓ | ✓ |
| 4 beam main frame construction | ✓ | ✓ |
| Triangle cutouts | ✓ | ✓ |
| 50” axle spacing | ✓ | ✓ |
| 25,000 lb. axles (5/8” wall) | 2 or 3 | 3 |
| Updated high-speed hydraulic system | ✓ | ✓ |
Fill out the form below and our Sales-Rep will get back with ASAP.