910 Compact Wheel Loader

Rear
Oscillating ±11 degrees; Locking differential (Standard)
Maximum Gross Power
110 HP
Bore
3.86 in
Maximum Gross Power - Maximum Engine Speed
2350 r/min

Axles

Rear
Oscillating ±11 degrees; Locking differential (Standard)
Front
Fixed; Locking differential (standard)

Engine

Maximum Gross Power
110HP
Bore
3.86in
Maximum Gross Power - Maximum Engine Speed
2350r/min
Maximum Gross Power - SAE J1995
111HP
Maximum Gross Torque - SAE J1995
335ft·lbf
Maximum Gross Torque - ISO 14396
332ft·lbf
Rated Net Power - ISO 9249
98HP
Rated Net Power - ISO 9249 (DIN)
99HP
Stroke
4.72in
Engine Model
Cat C3.6
Maximum Gross Power - ISO 14396
110HP
Rated Net Power - Rated Engine Speed
2200r/min
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Rated Net Power - SAE J1349
99HP
Displacement
220in³
Maximum Gross Power - ISO 14396 (DIN)
111HP
Emissions
Engine meets Tier 4 Final/Stage V emission standards.

Transmission

Forward and Reverse - Speed Range 1*
6.3mile/h
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.

Weights

Operating Weight
18102lb

Buckets

Bucket Capacities
1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - General Purpose
1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material
2.5-3.5 m³ (3.3-4.6 yd³)

Steering

Maximum Working Pressure - Steering Pump
2683psi
Steering Articulation Angle - Each Direction
40°
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
3.2s
Maximum Flow - Steering Pump
17gal/min
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.75turns

Loader Hydraulic System

Hydraulic Cycle Time - Dump, at Maximum Reach
1.4s
Hydraulic Cycle Time - Total Cycle Time
12.5s
Maximum Working Pressure - Implement Pump
3408psi
Relief Pressure - Tilt Cylinder
4931psi
Hydraulic Cycle Time - Rackback
2.2s
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
3046psi
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
5.2s
Maximum Flow - Implement Pump
32gal/min
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
3046psi
Maximum Flow - Implement Pump - 4th Function, Maximum Flow
24gal/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow
24gal/min
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
3.7s

Service Refill Capacities

Cooling System
5.7gal (US)
Fuel Tank
43.6gal (US)
Hydraulic System - Including Tank
25.9gal (US)
Hydraulic Tank
14.5gal (US)
Transmission
0.8gal (US)
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles - Front Center Differential
2gal (US)
Axles - Rear Center Differential
2gal (US)
Engine Crankcase
2.6gal (US)
Diesel Exhaust Fluid (DEF) Tank
4.8gal (US)

Tires

Note (2)
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Standard Size
15.5 R25 L2 XTLA
Other Choices Include
17.5 R25 L2 XTLA; 15.5 R25 L3 XHA2; 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (1)
Other tire choices are available. Contact your Cat dealer for details.

Cab

ROPS
ISO 3471:2008
FOPS
EN ISO 3449:2008 (ISO 3449:2005)
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (4)
*The measurements were conducted with the cab doors and windows closed.

Standard Equipment:

Optional Equipment: