Cat® Large Wheel Loaders are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely at a lower cost per ton. The 986 builds upon this legacy of durability, performance, safety, operator comfort, serviceability and sustainability.
Engine Power - ISO 14396:2002 449 hp
Operating Weight - Standard 97785 lb
Bucket Capacity Range 5.0-10.3 m³ (6.5-13.5 yd³)
Engine Model Cat® C15
Bore 5.4in
Displacement 927in²
Engine Model Cat® C15
Engine Power - ISO 14396:2002 449hp
Gross Power - SAE J1995:2014 456hp
Net Power - SAE J1349:2011 373hp
Note Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. • Net power advertised is the power avai
Peak Power Speed 1600
Peak Torque (1,200 rpm) - SAE J1995:2014 1778lb/ft
Rated Speed 2000
Rated Speed - 2,000 rpm - EEC 80/1269 373hp
Rated Speed - 2,000 rpm - ISO 9249 373hp
Stroke 6.75in
Torque Rise 16%
Bucket Capacity Range 5.0-10.3 m³ (6.5-13.5 yd³)
Cat Truck Match - High Lift 772/773
Cat Truck Match - Standard 770/735/740/745
Operating Weight - High Lift 104005lb
Operating Weight - Standard 97785lb
Rated Payload - High Lift (Quarry Face) 11ton (US)
Rated Payload - Loose Material (High Lift) 12.1ton (US)
Rated Payload - Loose Material (Standard) 14ton (US)
Rated Payload - Standard (Quarry Face) 11ton (US)
Direct Drive - Forward 2 8mile/h
Direct Drive - Forward 3 14mile/h
Direct Drive - Forward 4 24mile/h
Direct Drive - Reverse 2 9mile/h
Direct Drive - Reverse 3 16mile/h
Direct Drive - Reverse 4 25.4mile/h
Forward - 1 5mile/h
Forward - 2 8mile/h
Reverse - 1 5mile/h
Reverse - 2 8mile/h
Transmission Type Cat planetary power shift
Lift Cylinder - Bore 7.5in
Lift Cylinder - Stroke 45in
Lift/Tilt System - Circuit Load Sense
Lift/Tilt System - Pump 2 × 110 cc variable displacement
Maximum Flow at 2,165 rpm 123gal/min
Relief Valve Setting - Lift/Tilt 4050psi
Tilt Cylinder - Bore 6.7in
Tilt Cylinder - Stroke 28.4in
Dump 3.5s
Lower 5.2s
Lower Float Down 4.3s
Rack Back 4.5s
Raise 9s
Total Hydraulic Cycle Time 21.3s
Maximum Flow at 1,400 rpm 52gal/min
Steering Cut Off Pressure 4000psi
Steering System - Circuit Load Sense
Steering System - Pump Piston, variable displacement
Total Steering Angle 70°
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co
Front Fixed
Oscillation Angle ±12.5°
Oscillation Angle - Chain Arrangement ±8.5°
Rear Trunnion
Brakes ISO 3450:2011
ROPS/FOPS ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)
Axle Oil - Differentials and Final Drives - Front 49gal (US)
Axle Oil - Differentials and Final Drives - Rear 45gal (US)
Cooling Systems 26gal (US)
Crankcase 9gal (US)
Diesel Exhaust Fluid Tank 6gal (US)
Fuel Tank 141gal (US)
Fuel Tank - Short Lift 127gal (US)
Hydraulic System - Tank Only 34gal (US)
Hydraulic System Factory Fill 87gal (US)
Transmission 20gal (US)
Machine Sound Power Level (ISO 6395:2008) 113dB(A)
Machine Sound Power Level (ISO 6395:2008)** 110dB(A)
Note (1) * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
Note (2) ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
Note (3) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Operator Sound Pressure Level (ISO 6396:2008) 73dB(A)
Machine Sound Power Level (ISO 6395:2008) 113dB(A)
Machine Sound Power Level (ISO 6395:2008)** 110dB(A)
Note (1) * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
Note (2) ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
Note (3) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Operator Sound Pressure Level (ISO 6396:2008) 74dB(A)
Operator Sound Pressure Level (ISO 6396:2008)* 73dB(A)
B-Pin Height - Maximum Lift 16.1ft
Clearance at Maximum Lift 10.1ft
Front Axle Centerline to Bucket Tip 13.8ft
Ground to Center of Front Axle 3.2ft
Ground to Fuel Tank Clearance 2.3ft
Ground to Lower Hitch Clearance 1.5ft
Ground to Top of Exhaust Stacks 13.3ft
Ground to Top of Hood 10.7ft
Ground to Top of ROPS 13.5ft
Maximum Overall Height - Bucket Raised 22.4ft
Maximum Overall Length 36.6ft
Note
Reach - Maximum Lift 7.1ft
Rear Axle - Centerline to Bumper 10.3ft
Wheel Base 12.5ft
B-Pin Height - Maximum Lift 17.6ft
Clearance at Maximum Lift 11.6ft
Front Axle Centerline to Bucket Tip 15.3ft
Ground to Center of Front Axle 3.2ft
Ground to Fuel Tank Clearance 2.3ft
Ground to Lower Hitch Clearance 1.5ft
Ground to Top of Exhaust Stacks 13.3ft
Ground to Top of Hood 10.7ft
Ground to Top of ROPS 13.5ft
Maximum Overall Height - Bucket Raised 23.9ft
Maximum Overall Length 38ft
Note
Reach - Maximum Lift 7.4ft
Rear Axle - Centerline to Bumper 10.3ft
Wheel Base 12.5ft
B-Pin Height at Maximum Lift 15ft
Clearance at Maximum Lift 10.7ft
Front Axle Centerline to Bucket Tip 12.2ft
Ground to Center of Rear Axle 3.2ft
Ground to Fuel Tank Clearance 2.3ft
Ground to Lower Hitch Clearance 1.5ft
Ground to Top of Exhaust Stacks 13.3ft
Ground to Top of Hood 10.7ft
Ground to Top of ROPS 13.5ft
Maximum Overall Height, Bucket Raised 20.9ft
Maximum Overall Length 35ft
Reach at Maximum Lift 8ft
Rear Axle Center Line to Bumper 10.3ft
Wheel Base 12.5ft
B-Pin Height at Maximum Lift 15ft
Front Axle Centerline to Bucket Tip 12.6ft
Ground to Center of Rear Axle 3.2ft
Ground to Fuel Tank Clearance 2.3ft
Ground to Lower Hitch Clearance 1.5ft
Ground to Top of Exhaust Stacks 13.3ft
Ground to Top of Hood 10.7ft
Ground to Top of ROPS 13.5ft
Maximum Overall Length 35.4ft
Rear Axle Center Line to Bumper 10.3ft
Wheel Base 12.5ft
Standard and optional equipment may vary. Consult your Cat dealer for details.
Alarm, back-up
Alternator, single 145 amp
Batteries, maintenance-free
Converter, 10/15 amp, 24V to 12V
Lighting system (LED, work lights, access and service platform lighting)
Starting and charging system, 24V
Auxiliary jump start receptacle
Graphical Information Display, displays real time operating information, performs calibrations and customizes operator settings
Air conditioner
Cat Vision, rear vision camera system
Cat Production Measurement ready
Cab precleaner
Cab, sound suppressed and pressurized, integrated rollover protective structure (ROPS/FOPS) radio ready for entertainment, includes antenna, speakers and converter (12-volt 5-amp) and power port
Controls, lift and tilt function
Heater, defroster
Horn, electric
Instrumentation, gauges:
– Coolant temperature
– Fuel level
– DEF level
– Hydraulic oil temperature
– Powertrain oil temperature
Light, cab, dome
Lunchbox, beverage holders
Mirrors, rearview (externally mounted)
Seat, Cat Comfort (cloth), air suspension, six-way adjustable
Seat belt minder
Seat belt, retractable, 76 mm (3 in) wide
Steering and Transmission Integrated Control (STIC™) System
UV glass
Transmission gear indicator
Wet-Arm wipers/washers (front and rear):
– Intermittent front and rear wipers
Lights, directional
Brakes, oil-cooled, multi-disc, service/secondary
Case drain screens
Crankcase guard
Electro hydraulic parking brake
Engine, C15 MEUI diesel, turbocharged/aftercooled
Ground level engine shutdown switch
Turbine precleaner, engine air intake
Starting aid, ether, automatic
Torque converter, Neutralizer
Transmission, planetary powershift, 4F/3R electronic control
Manual switch and automatic fuel priming
Automatic bucket lift kickout/positioner
Hydraulically driven demand fan
Couplings, Cat O-ring face seals
Doors, service access (locking)
Ecology drains for engine, radiator, hydraulic tank
Fuel tank, 535 L (141 gal)
Hitch, drawbar with pin
Hoses, Cat XT™
Hydraulic, steering and brake filtration/screening system
Cat® Clean Emission Module
Oil sampling valves
Premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)
Rear access to cab and service platform
Steering, load sensing
Toe kicks
Vandalism protection caplocks
Standard and optional equipment may vary. Consult your Cat dealer for details.
–50° C (–58° F) antifreeze
Engine oil change system, high speed, Wiggins
Engine block heater 120V or 240V
High ambient cooling – software
Front and rear roading fenders
Fast fill fuel system (Shaw-Aero)
Cold Weather Starting (extra two batteries)
Aggregate Handler
Block Handler
Cat® Detect, object detection system
Cat Production Measurement
AM/FM/CD/MP3 radio
Satellite Sirius radio with Bluetooth
LED warning strobe
CB radio ready
Window pull down visor
Handrail mounted mirrors
