The Cat® 950 Wheel Loader brings premium performance with simple-to-use technologies, helping to boost operator efficiencies and deliver consistent high bucket fill factors, resulting in highly efficient productivity. Long service intervals help to reduce your downtime. This machine is designed to meet emission standards without interrupting operation, delivering great performance, reliability, durability, and versatility, resulting in a machine that is built to meet your needs.
Engine Power - 2,100 rpm ISO 14396:2002 249 hp
Operating Weight 42461 lb
Engine Power - 2,100 rpm ISO 14396:2002 253 hp (metric)
Engine Model Cat® C7.1
Biodiesel Capability Up to B20¹
Displacement 427in³
Emissions Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
Engine Model Cat® C7.1
Engine Power - 2,100 rpm ISO 14396:2002 249hp
Engine Power - 2,100 rpm ISO 14396:2002 253 hp (metric)
Engine Torque - 1,300 rpm ISO 14396:2002 908lbf·ft
Gross Power - 2,100 rpm SAE J1995:2014 253hp
Gross Power - 2,100 rpm SAE J1995:2014 257 hp (metric)
Gross Torque - 1,300 rpm SAE J1995:2014 916lbf·ft
Net Power - 2,100 rpm ISO 9249:2007, SAE J1349:2011 235 hp (metric)
Net Torque - 1,300 rpm ISO 9249:2007, SAE J1349:2011 863lbf·ft
Note (1) The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
Note (2) ¹Cat engines are compatible with diesel fuel blended with following lower carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidel
Note Weight based on a machine configuration with parallel lift Z-bar linkage, Bridgestone 23.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link™, front manual differential/open rear
Operating Weight 42461lb
Forward - 1 4.3mile/h
Forward - 2 7.5mile/h
Forward - 3 12mile/h
Forward - 4 16mile/h
Forward - 5 24.5mile/h
Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.
Reverse - 1 4.3mile/h
Reverse - 2 7.5mile/h
Reverse - 3 16mile/h
Exterior Sound Power Level - ISO 6395:2008 107dB(A)
Exterior Sound Power Level - ISO 6395:2008² 104dB(A)
Note (1) ¹Including countries that adopt the EU and UK Directives.
Note (2) ²Exterior Sound Power Level - European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701.
Operator Sound Pressure Level - ISO 6396:2008 70dB(A)
Operator Sound Pressure Level - ISO 6396:2008 ¹ 69dB(A)
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons).
Breakout Force 40690lbf
Note (1) For a machine configuration as defined under “Weight.”
Note (2) Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Static Tipping Load - Full 40° Turn - No Tire Deflection 26369lb
Static Tipping Load - Full 40° Turn - With Tire Deflection 24694lb
Cooling System 14.3gal (US)
Crankcase 5.5gal (US)
DEF Tank 4gal (US)
Differential - Final Drives - Front 11.4gal (US)
Differential - Final Drives - Rear 11.4gal (US)
Fuel Tank 68.6gal (US)
Hydraulic Tank 25.6gal (US)
Transmission 11.4gal (US)
Hydraulic Cycle Time - Total 9.1s
Implement System - Maximum Operating Pressure 4250psi
Implement System - Maximum Pump Output at 2,340 rpm 85gal/min
Ground Clearance 1.08ft
Height - Top of Hood 8.83ft
Height - Top of ROPS 11.33ft
Hinge Pin Height at Carry Height 2ft
Hinge Pin Height at Maximum Lift 13.08ft
Lift Arm Clearance at Maximum Lift 10.67ft
Note All dimensions are approximate and based on machine equipped with 3.1 m³ (4.1 yd³) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires.
Overall Length - Without Bucket 23.08ft
Rack Back - Carry Height 49°
Rack Back - Maximum Lift 59°
Tread Width 7ft
Wheel Base 10.92ft
Width over Tires (Loaded) 9.33ft
Ground Clearance 1.08ft
Height - Top of Hood 8.83ft
Height - Top of ROPS 11.33ft
Hinge Pin Height at Carry Height 2.5ft
Hinge Pin Height at Maximum Lift 14.75ft
Lift Arm Clearance at Maximum Lift 11.92ft
Note All dimensions are approximate and based on machine equipped with 3.1 m³ (4.1 yd³) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires.
Overall Length - Without Bucket 24.58ft
Rack Back - Carry Height 49°
Rack Back - Maximum Lift 56°
Tread Width 7ft
Wheel Base 10.92ft
Width over Tires (Loaded) 9.33ft
Standard and optional equipment may vary. Consult your Cat dealer for details.
Lights: halogen, 4 work lights, 2 front roading lights with turn signals, 2 rearview lights
Starting and charging system, 24V
Starter, electric, heavy duty
Steering system, load sensing with dedicated variable displacement piston pump
Implement system, load sensing with variable displacement piston pump
Oil sampling valves, Cat XT™ hoses
Ride control, dual accumulators (Optional depending on region)
Kickouts: lift and tilt
Parallel Lift, Z-bar
Primary touchscreen monitor (Cat Payload, quad screens, machine settings & messages)
Front dash with analog gauges, LCD display, and warning lights
Maintenance reminders
Visibility: mirrors, rearview camera
Window cleaning platform, front
Standard and optional equipment may vary. Consult your Cat dealer for details.
Guards: powertrain, crankcase, window glass, cylinders, rear
Cat Autolube system
Fenders, extensions or roading
Toolbox
Biodegradable hydraulic oil
High-speed oil change system
Rear cab access
Cold start, 120V or 240V
Lights: LED
3rd and 4th auxiliary functions with ride control
Quick coupler control
High Lift
Tire Pressure Monitor
Cat Detect rear radar system
Dedicated rearview screen
Multiview (360°) vision system
4-point seat belt retractor
Reversing strobe lights
Seat belt monitoring beacon
Secondary steering system, electrical (Standard depending on region)
Wheel chocks
Warning beacon
Corrosion resistant
Auxiliary Counterweight
Waste and industrial
Forestry