The Cat® 232D3 Skid Steer Loader, with its vertical lift design, delivers extended reach and lift height for quick and easy truck loading. Its stability and lifting performance provides excellent material handling.
Gross Power - SAE J1995 67.1 hp
Rated Operating Capacity 1900 lb
Operating Weight 6514 lb
Net Power - SAE 1349 65.8 hp
Bore 3.3in
Displacement 134.3in³
Engine Model Cat C2.2 CRDI
Gross Power - SAE J1995 67.1hp
Net Flywheel Power 65.8hp
Net Power - ISO 9249 66.5hp
Net Power - SAE 1349 65.8hp
Peak Torque - 1,500 rpm - SAE J1995 153ft·lbf
Stroke 3.9in
Breakout Force - Tilt Cylinder 3928lb
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery,
Rated Operating Capacity 1900lb
Rated Operating Capacity with Optional Counterweight 2000lb
Tipping Load 3800lb
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery,
Operating Weight 6514lb
Bucket Pin Height - Carry Position 8.4in
Bucket Pin Height - Maximum Lift 118.1in
Bucket Pin Reach - Maximum Lift 8.8in
Bumper Overhang - Behind Rear Axle 35.2in
Clearance at Maximum Lift and Dump 88.7in
Departure Angle 27.9°
Ground Clearance 6.7in
Height - Top of Cab 79.9in
Length - With Bucket on Ground 127.3in
Length - Without Bucket 99.3in
Maximum Dump Angle 47.4°
Maximum Overall Height 150.9in
Maximum Reach - With Arms Parallel to Ground 49.2in
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery,
Rack Back Angle - Maximum Height 88.2°
Reach - Maximum Lift/Dump 25.7in
Turning Radius from Center - Bucket 77.8in
Turning Radius from Center - Coupler 43.4in
Turning Radius from Center - Machine Rear 59.6in
Vehicle Width over Tires 58.9in
Wheel Base 41.5in
FOPS ISO 3449:2005 Level I
ROPS ISO 3471:2008
Chain Box - Each Side 1.8gal (US)
Cooling System 3.2gal (US)
Engine Crankcase 2.6gal (US)
Fuel Tank 15.1gal (US)
Hydraulic System 11.9gal (US)
Hydraulic Tank 9gal (US)
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) 50.9hp
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow 26gal/min
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure 3336psi
Hydraulic Flow - Standard - Hydraulic Power (Calculated) 35.5hp
Hydraulic Flow - Standard - Loader Hydraulic Flow 18gal/min
Hydraulic Flow - Standard - Loader Hydraulic Pressure 3336psi
Travel Speed - Forward or Reverse - One Speed 7.6mile/h
Travel Speed - Forward or Reverse - Two Speed Option 11.1mile/h
Inside Cab* 83 dB(A)
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2) *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee
Note (3) **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab** 101 dB(A)
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
12 volt Electrical System
80 ampere Alternator
Ignition Key Start/Stop Switch
Lights: Gauge Backlighting, Two Rear Tail Lights, Two Adjustable Front and Rear Halogen Lights, Dome Light
Backup Alarm
Heavy Duty Battery, 850 CCA
Gauges: Fuel Level, Hour Meter
Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Glow Plug Activation, Hydraulic Filter Restriction, Hydraulic Oil Temperature, Parking Brake Engaged
Fold In Ergonomic Contoured Armrest
Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages
ROPS Cab, Open, Tilt Up
FOPS, Level I
Top and Rear Windows
Floor Mat
Interior Rearview Mirror
12 volt Electric Socket
Horn
Hand (Dial) Throttle, Electronic
Adjustable Joystick Controls
Anti-theft Security System with 6-button Keypad
Storage Compartment with Netting
Cat C2.2, Turbo Diesel Engine, Meeting Tier 4 Final and Stage V emission standards
Air Cleaner, Dual Element, Radial Seal
S·O·SSM Sampling Valve, Hydraulic Oil
Filters, Cartridge-type, Hydraulic
Filters, Canister-type, Fuel and Water Separator
ATAAC/Radiator/Hydraulic Oil Cooler (side-by-side)
Spring Applied, Hydraulically Released Parking Brakes
Hydrostatic Transmission
Four Wheel Chain Drive
Engine Enclosure, Lockable
Extended Life Antifreeze, –36° C (–33° F)
Machine Tie Down Points (6)
Support, Lift Arm
Hydraulic Oil Level Sight Gauge
Radiator Coolant Level Sight Gauge
Radiator, Expansion Bottle
Cat ToughGuard™ Hose
Auxiliary, Hydraulics, Continuous Flow
Heavy Duty, Flat Faced Quick Disconnects with Integrated Pressure Release
Split D-Ring to Route Work Tool Hoses Along Side of Left Lift Arm
Electrical Outlet, Beacon
Belly Pan Cleanout
Variable Speed Demand Fan
Product Link™ PL240, Cellular
Hydraulics, Standard or High Flow
Quick Coupler, Mechanical or Powered
Highly Visible Seat Belt, 50 mm (2 in) or 75 mm (3 in)
EU Preparation Package (Europe only)
Power Train: One Speed, One Speed with Ride Control, Two Speed
Tires, 10 × 16.5
PERFORMANCE PACKAGES:
– Performance Package H1: Standard Flow Hydraulics (No Self Level)
– Performance Package H2: Standard Flow Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower)
– Performance Package H3: High Flow Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower)
COMFORT PACKAGES:
– Open ROPS (C1): Foot Throttle, Headliner, Cup Holder, and choice of Seat (High Back, Heated, Air Ride Seat) (No Heater or Door)
– Enclosed ROPS with A/C (C3): Foot Throttle, Headliner, Heater and Defroster, Air Conditioner, Side Windows, Cup Holder, Radio Ready, choice of Seat (Mechanical Suspension or High Back, Heated, Air Ride Seat) and Door (Glass or Polycarbonate)
External Counterweights
Beacon, Rotating
Engine Block Heater – 120V
Oil, Hydraulic, Cold Operation
Product Link PL641, Cellular
Advanced Display with Rearview Camera: Full Color, 127 mm (5 in) LCD screen, Advanced Multi-operator Security System, On-screen Adjustments for Implement Response, Hystat Response, and Creep Control; Standard equipment in Europe only
Bluetooth® Radio with Microphone (AM/FM/Weather Band Receiver with USB and Auxiliary Input Jack)
