The Cat® AD63 Underground Truck is designed for high production, lower costs and increased efficiency. It’s built tough to stand up to the harsh conditions of your site, and features a number of improvements over its predecessor, including a 5% greater payload and more torque. The world-class cab keeps operators safe and comfortable all shift long, and new enhancements help ensure the safety of everyone working in, on or around the machine. It’s powered by a Cat C27 engine that meets EU Stage V Emissions Standards for cleaner performance, as well as reduced ventilation costs. And its rugged construction and simplified maintenance make for longer life and lower operating costs, so you can get the most out of your investment.
Engine Model Cat® C27
Engine Power - EU Stage V Engine - ISO 14396:2002 795 HP
Nominal Payload Capacity 138891 lb
Bore 5.4 in
Bore 5.4in
Displacement 1650in²
Engine Model Cat® C27
Engine Power - EU Stage V Engine - ISO 14396:2002 795HP
Note (1) Meets EU Stage V emission standards and U.S. EPA Tier 4 Final.
Note (2) Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.
Note (3) All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications
Stroke 6in
Body Capacities 26.9-38.3 m³ (35.2-50.1 yd³)
Gross Machine Operating Mass 262218lb
Nominal Payload Capacity 138891lb
Empty 115577lb
Empty - Front Axle 81716lb
Empty - Rear Axle 33861lb
Loaded 254468lb
Loaded - Front Axle 126669lb
Loaded - Rear Axle 127800lb
Empty - Front Axle 70.7%
Empty - Rear Axle 29.3%
Loaded - Front Axle 49.8%
Loaded - Rear Axle 50.2%
Forward - 1 4.1mile/h
Forward - 2 5.7mile/h
Forward - 3 7.7mile/h
Forward - 4 10.3mile/h
Forward - 5 14mile/h
Forward - 6 18.9mile/h
Forward - 7 25.5mile/h
Note Maximum travel speeds with standard 35 × 65 R33 tires.
Reverse - 1 5.3mile/h
Differential Ratio 3.46:1
Final Drive Ratio 5.5:1
Total Reduction Ratio 19.04:1
Lower 24s
Raise 13s
Total Cycle Time 37s
Dump Body - 1 - Standard 35.2yd³
Dump Body - 2 42.6yd³
Dump Body - 3 44.2yd³
Dump Body - 4 47.9yd³
Dump Body - 5 (Light Material) 50.1yd³
Note Heaped SAE 2:1.
Articulation Angle 42.5°
Frame Oscillation 10°
Inside Turn Radius 218.1in
Outside Clearance Radius 393.9in
Cooling System 39.6gal (US)
Engine Crankcase - With Filter 25gal (US)
Front Differential and Final Drives 36.5gal (US)
Fuel Tank 237.7gal (US)
Hydraulic Tank 100.6gal (US)
Rear Differential and Final Drives 36.5gal (US)
Transmission 14gal (US)
Tire Size 35 × 65 R33
Standards ROPS/FOPS Certified Cab
Brake retarder control, automatic
Brakes:
– All wheel disc
– Oil cooled
– Parking brakes, four wheels
Control throttle shifting
Engine:
– Cat C27 12 cylinder diesel engine
– EU Stage V
– Air-to-air aftercooler (ATAAC)
– Fuel priming aid
Transmission, automatic planetary power shift (7F/1R)
– Gear blockout with tray up, programmable
– Ground speed limiting, programmable
– Torque converter with automatic lockup
Four wheel drive
Remote transmission cooler
Alarm, reversing
Alternator, 225 amp
Disconnect switch, 2 post, ground level
– Electric starting, 24V
Lights, LED:
– Headlights with dimmer switch
– Light, brake and tail
– Lights, reversing, automatic when reverse gear selected
Work light, rear, cab mounted
– Receptacle GP, auxiliary start
– Shutdown switch, ground level
– Product Link Elite
– Machine health information
Cab, enclosed:
– ROPS/FOPS certified
– Tilt (cab is able to tilt 43° for maintenance access)
– HVAC, dual system
Caterpillar Electronic Monitoring System (CEMS), (dash instrument panels)
Operator Presence System
Automatic Brake Application (ABA)
Brake Gauges, Front and Rear
Idle timer (programmable)
Light, residual brake pressure
Low hydraulic oil level alarm
Low park brake pressure indicator
Mirrors, rear view
Radio ready
Seat, trainer/passenger with seat belt
Steering wheel, tilt/telescopic
Turn signal indicators
Windshield wiper and washer
TLV2 Cat Comfort Air Seat
Tires must be selected from the mandatory attachments section
Rims (set of 4):
– Five piece
– Tubeless
Adapters, oil sample
Indicator light, tray up
Axle suspension, front
Belly guards
Bumpers, front, rubber
Cap, radiator, manual release
Catalytic exhaust purifier/muffler
Covers, exhaust
Handholds
Handrails, fold down
Dump body
Firewall
Hitch, articulated and oscillated
Hydraulic Burst Protection
Lifting lugs, frame
Secondary steering
Tow pin, front and rear
Tire Arrangement:
– Tire, 35/65 R33 VSNT Bridgestone
Ventilated covers
Battery Shutdown
– Ground Level Isolation, In Cab Isolation Switch
– Ground Level Isolation, Engine Shutdown Switch
– Ground Level Isolation, In Cab Isolation, Engine Shutdown Switch
Body Dump
– Body, (32.6 m³/42.6 yd³)
– Body, (33.8 m³/44.2 yd³)
– Body, (36.6 m³/47.9 yd³)
– Body, (38.3 m³/50.1 yd³)
Body Liners, Impact and/or Wear
– 10 mm, Body, Dump (26.9 m³/35.2 yd³)
– 10 mm, Body, Dump (32.6 m³/42.6 yd³)
– 10 mm, Body, Dump (33.8 m³/44.2 yd³)
– 10 mm, Body, Dump (36.6 m³/47.9 yd³)
– 10 mm, Body, Dump (38.3 m³/50.1 yd³)
Body Wear Plate, External
– 8 mm, Body, Dump (26.9 m³/35.2 yd³)
– 8 mm, Body, Dump (32.6 m³/42.6 yd³)
– 8 mm, Body, Dump (33.8 m³/44.2 yd³)
– 8 mm, Body, Dump (36.6 m³/47.9 yd³)
Body Wear Protection Option: wear strip to cover edge of the pusher plate or full length of the ejector body tub side walls must be selected if the ejector body was chosen
Brake Pressure Gauges
Camera, Color Rear Facing
Cover, Anti Vandalism for Shipping
Aftertreatment Options
– DPF (Flow Through)
– DPF (Wall Flow)
Fast Fill System
– Coolant
– Engine Oil
– Fuel (Dual Tanks)
– Hydraulic Oil
– Transmission Oil
Ansul Fire Suppression, Wet 76L (AS5062)
Fluids
– Arctic Fuel
– Arctic Coolant
Lighting
– Headlights with Dimmer Switch, LED
– Rear Work Light (Cab Mounted), LED
– Reversing Lights, LED
Lubrication System
– Automatic, Dump
Operator Station
– Sun Visor
Park Brake Switch Engagement
– Push to Apply
– Pull to Apply
Payload
– Truck Payload Measurement System (TPMS), Dump Body Only
Reflective Tape
Rims
– Rim Identification Numbering
– Spare, Tubeless
Seat Cover
– Cat Comfort TLV2
– Seat Cover, Companion
Service Tools
– Body Pin Removal Tool
– Collet Jacking Bolts, Dump or Ejector
– Hoist Cylinder Supports (for Body Removal)
Window Dual Panel
NOTE: Not all features are available in all regions.
See your Cat dealer for more information
