The Cat® AD45 Underground Truck delivers all the power, performance and reliability you expect from the AD45 — but the latest model also offers an an advanced EU Stage V compliant engine and aftertreatment solution that meets the strictest emissions standards, lowers your carbon footprint and improves air quality in your mine. In addition, a retrofit solution is available that allows you to retrofit the previous model, the AD45B, to meet the same strict standards. This ultra-clean diesel machine delivers superior productivity thanks to its ideal match with the next generation Cat R1700 underground loader and is technology-enhanced with features that improve productivity, boost uptime and keep operators and personnel safer on the job.
Please note that model availability may vary by region. Contact your local Cat dealer for details on models available in your area.
Engine Model Cat® C18
Engine Power - EU Stage V Engine - ISO 14396:2002 598 hp
Nominal Payload Capacity 99208 lb
Engine Power - Tier 3 Engine - ISO 14396:2002 581 hp
Bore 5.7in
Displacement 1104.53in³
Engine Model Cat® C18
Engine Power - EU Stage V Engine - ISO 14396:2002 598hp
Engine Power - Tier 3 Engine - ISO 14396:2002 581hp
Engine Power - VR Engine - ISO 14396:2002 581hp
Note (1) Power ratings apply at a rated speed of 2,000 rpm when tested under the reference conditions for the specified standard.
Note (2) All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat
Note (3) Minimal engine derating* required up to 3048 m (10,000 ft) @ rated speed for Stage V engines, 2700 m (8,858 ft) for Tier 3/Stage IIIA equivalent engines and 3505 m (11,500 ft) for Tier 2/Stage II equivalent VR engines.
Note (4) Optional Ventilation Reduction Package available.
Note (5) Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available.
Note (6) Optional engine available that meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Note (7) *<5 %
Stroke 7.2in
Body Capacities 18.0-25.1 m³ (23.5-32.8 yd³)
Gross Machine Mass 196765lb
Nominal Payload Capacity 99208lb
Shipping Mass (Other Engine Models) 94415lb
Shipping Mass (Stage V Engine Model) 96225lb
Lower 21 Seconds
Raise 15 Seconds
Total Cycle Time 36 Seconds
Empty - Front Axle 70.7%
Empty - Rear Axle 29.3%
Loaded - Front Axle 46.8%
Loaded - Rear Axle 53.2%
Operating Mass 88320lb
Operating Mass + Rated Payload 187530lb
Operating Mass + Rated Payload - Front Axle 85355lb
Operating Mass + Rated Payload - Rear Axle 102175lb
Operating Mass - Front Axle 61225lb
Operating Mass - Rear Axle 27095lb
Empty - Front Axle 69.3%
Empty - Rear Axle 30.7%
Loaded - Front Axle 45.5%
Loaded - Rear Axle 54.5%
Operating Mass 91285lb
Operating Mass + Rated Payload 190495lb
Operating Mass + Rated Payload - Front Axle 89235lb
Operating Mass + Rated Payload - Rear Axle 101260lb
Operating Mass - Front Axle 64565lb
Operating Mass - Rear Axle 26720lb
Lower 21 Seconds
Raise 14 Seconds
Total Cycle Time 35 Seconds
Dump Body - 1 23.6yd³
Dump Body - 2 - Standard 27.9yd³
Dump Body - 3 32.8yd³
Ejector Body 29.9yd³
Note Heaped SAE 2:1.
Articulation Angle 42.5°
Frame Oscillation 10°
Inside Clearance Radius* 209in
Note *Clearance dimensions are for reference only.
Outside Clearance Radius* 371in
Forward - 1 4.4mile/h
Forward - 2 5.9mile/h
Forward - 3 8mile/h
Forward - 4 10.8mile/h
Forward - 5 14.6mile/h
Forward - 6 19.7mile/h
Forward - 7 26.4mile/h
Note Maximum travel speeds with standard 29.5 × R29 tires.
Reverse - 1 4.2mile/h
Reverse - 2 5.6mile/h
Cooling System 22.5gal (US)
Engine Crankcase - With Filter 16.9gal (US)
Front Differential and Final Drives 20.3gal (US)
Fuel Tank 201.8gal (US)
Hydraulic Tank 70.3gal (US)
Rear Differential and Final Drives 21.9gal (US)
Transmission 15.9gal (US)
Tire Size 29.5 × R29
Standards ROPS/FOPS Certified Cab
Differential Ratio 3.46:1
Final Drive Ratio 5.65:1
Total Reduction Ratio 19.55:1
12V power supply in cab
Alternator, 95-amp
Auxiliary start receptacle
Battery disconnect switch, ground level
Circuit breaker, 80-amp
Corrosive protection spray
Diagnostic connector
Electric starting, 24V
Engine shutdown switch, ground level
– Front left hand side
Lighting
– Headlights with dimmer switch, LED
– Brake and tail lights
– Rear work light (cab mounted), LED
– Reversing lights, LED
Low maintenance batteries
Reversing alarm
Starting and charging system
Cat Electronic Monitoring System (Cat EMS)
Electric horns
Gauges
– Engine coolant temperature
– Transmission coolant temperature
– Hydraulic oil temperature
– Fuel level
– Speedometer
– Tachometer
Indicator lights
– Alert warning light
– Body up position warning
– High beam
– Residual brake pressure warning
– Retarder application
– Turn signal
Low hydraulic level warning
Open operator station ROPS/FOPS structure
Operator presence system (auto park brake)
Rearview mirrors
Suspension seat Cat Comfort TLV2 with retractable seat belt
Trainer/passenger seat and seat belt
Tilt/telescopic steering wheel
Turn signal indicators
Cat C18 ATAAC diesel engine, 6-cylinder
Automatic brake retarder control
Auto shift transmission 7 speed forward/2 speed reverse
Control throttle shifting
Engine air intake precleaner
Electric fuel priming pump
Exhaust, turbo compartment shielding
Four wheel drive
Long life coolant
Programmable ground speed limiting
Programmable gear block out with tray up
Radiator, cross flow; Radiator cap manual release
Secondary steering system
SAFR™ full hydraulic enclosed wet, multiple-disc brakes, oil cooled
Torque converter, standard with automatic lockup
Body, dump, (21.3 m³, 27.9 yd³)
Catalytic exhaust purifier/muffler group
Centralized lubrication points
Decals, international picto graphics
Dual fuel tanks
Engine and transmission belly guards
Fenders, front, rear flaps
Fire wall
Fuel system manual shut off tap
Front axle suspension
Frame lifting lugs
Front and rear tow pin
Front rubber bumpers
Gauges, brake pressure
Hand hold (access on/off top deck)
Hitch, articulated and oscillated
Operation and Maintenance Manual – English and other applicable local languages to select
S·O·S port
– Coolant
– Engine oil
– Hydraulic oil
– Transmission oil
Swing out radiator grill
Tires and rims: A tire must be selected from the mandatory attachments section of the machine price list. Base machine price includes a standard tubeless rim allowance only.
Battery shutdown
– Ground level isolation, in cab isolation switch
– Ground level isolation, engine shutdown switch
– Ground level isolation, in cab isolation, engine shutdown switch
Body dump
– Body (18.0 m³, 23.5 yd³)
– Body (25.1 m³, 32.8 yd³)
Body ejector
– Ejector (22.9 m³, 30.0 yd³)
Body liners, impact and/or wear
– 10 mm (0.4"), body, dump (18.0 m³, 23.5 yd³)
– 10 mm (0.4"), body, dump (21.3 m³, 27.9 yd³)
– 10 mm (0.4"), body, dump (25.1 m³, 32.8 yd³)
– 10 mm (0.4"), body, ejector (22.9 m³, 30.0 yd³)
Body wear plate, external
– 16 mm (0.62"), body, dump (18.0 m³, 23.5 yd³)
– 16 mm (0.62"), body, dump (21.3 m³, 27.9 yd³)
– 16 mm (0.62"), body, dump (25.1 m³, 32.8 yd³)
Camera
– Color rear facing
– Color loading
Cover, anti vandalism for shipping
Engine options
– Engine, Stage V
– Engine, Ventilation Reduction (VR)
– Equivalent to Tier 3
– After-treatment options (for use with VR Engine only)
DPF (Flow Through) Filter
Fast fill system
– Coolant
– Engine oil
– Fuel (dual tanks)
– Hydraulic oil
– Transmission oil
Fire suppression system
– Ansul, wet
Fluids
– Arctic fuel
– Arctic coolant
Handrail Extension
Lubrication system
– Automatic, dump or ejector body
– Centralized, ejector body
Mine transfer
– Mine transfer ready front frame (tack welded)
– Mine transfer ready dump body (tack welded)
– Mine transfer ready ejector body (tack welded)
Operators station ROPS/FOPS enclosed
– Air conditioning
– Cab pressurizer and filter
– Dome light
– Heater
– Radio ready compartment for radio and speakers
– Sun visor
– Window, sliding cab door
Park brake switch engagement
– Push to apply
– Pull to apply
Payload
– Truck Payload Measurement System (TPMS)
Reflective tape
Rims
– Rim identification numbering
– Spare, tubeless
Seat
– Suspension seat Cat Comfort TLV2, vinyl
– Suspension seat tee, mechanical
Seat cover
– Tee and Cat Comfort TLV2
– Seat cover, companion
Service tools
– Collet jacking bolts, dump or ejector
– Diagnostics box
– Hoist cylinder supports (for body removal)
– Brake wear gauge
– Reference parts manual for additional tooling available
Switches
– Engine shutdown, fire suppression activation
– Idle timer
– Engine shutdown, fire suppression activation/idle timer
Technology
– Product Link Elite (PLE) system
Tire arrangements
– Tire, 29.5 × R29 VSNT Bridgestone
– Tire, 29.5 × R29 VSDL Bridgestone
Torque converter, high altitude, 3000 m (9,842 ft) and up
NOTE: Not all features are available in all regions. See your Cat dealer for more information.
