The Cat?� C32 Industrial Power Unit is offered with a ratings of 746 bkW (1000 bhp) @ 1800 rpm. This rating meets U.S. EPA Tier 4 Final emission standards. Applications powered by C32 engines include: Bore/Drill Rigs, Chippers/Grinders, Construction, Cranes, Dredgers, Forestry, Hydraulic Power Units, General Industrial, Irrigation Equipment, Material Handling, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Surface Hauling Equipment and Trenchers.
Maximum Power 1000 hp
Maximum Torque 3825 lb-ft @ 1200 rpm
Emissions U.S. EPA Tier 4 Final and EU Stage V
Rated Speed 1800 rpm
Maximum Power 1000hp
Maximum Torque 3825lb-ft @ 1200 rpm
Minimum Power 1000hp
Rated Speed 1800 rpm
Emissions U.S. EPA Tier 4 Final and EU Stage V
Aftertreatment DOC
Aspiration Twin Turbocharged Aftercooled (TTA)
Bore 5.7in
Combustion System Direct Injection
Compression Ratio 16.0:1
Cooling System liquid
Cycle 4
Displacement 1958.9in³
Engine Configuration V-12
Rotation from Flywheel End Counterclockwise
Stroke 6.4in
Height 77.6in
Length 100.7in
Width 64.4in
Turbocharged
Air-to-Air Aftercooled
Electronic control system
Over-foam wiring harness
Automatic altitude compensation
Power compensated for fuel temperature
Configurable software features
Engine monitoring system SAE J1939 broadcast and control
Thermostats and housing, vertical outlet
Jacket water pump, centrifugal
Water pump, inlet
Exhaust manifold, dry
Optional exhaust outlet
Choice of SAE No. 0 or SAE No. 1 flywheel housing
MEUI injection
Fuel filter, secondary (2 micron)
Electronic fuel priming
Open crankcase ventilation system
Oil cooler
Oil filler
Lube oil filter
Rear sump oil pan
Oil dipstick
Gear driven oil pump
