Cat?� C9.3B Industrial Power Unit

Cat?� C9.3B Industrial Power Unit

The Cat?� C9.3B IPU configuration not only provides the flexibility andoptions found on a standard industrial engine, but also comes fittedwith air filter and mounting, an integrated cooling system with airand coolant lines, and full wire harnessing with an engine-mountedECM

  • Maximum Power 416 hp

  • Emissions Brazil MAR-1, UN R96 Stage IIIA

  • Rated Speed 1800-2200 rpm

  • Minimum Power 308 hp

Request a quote

Product Specifications

Specifications

Power Rating

  • Maximum Power 416hp

  • Minimum Power 308hp

  • Rated Speed 1800-2200 rpm

Emission Standards

  • Emissions Brazil MAR-1, UN R96 Stage IIIA

General

  • Aspiration Turbocharged Aftercooled (TA)

  • Bore 4.5in

  • Compression Ratio 16.5:1

  • Displacement 567.5in³

  • Engine Configuration Inline 6, 4-Stroke-Cycle-Diesel

  • Rotation from Flywheel End Counterclockwise

  • Stroke 5.9in

Power Unit Dimensions

  • Height 63in

  • Length 83in

  • Weight 3265lb

  • Width 43in

Features

Equipment

Standard Equipment

  • Turbocharged

  • Air-to-Air Aftercooled

  • Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)

  • Electronic control system

  • Over-foam wiring harness

  • Automatic altitude compensation

  • Power compensated for fuel temperature

  • Configurable software features

  • Engine monitoring system SAE J1939 broadcast and control

  • Integrated Electronic Control Unit (ECU)

  • Remote fan control

  • Vertical or RH thermostat outlet

  • Centrifugal water pump

  • Guidance on cooling system design available through your dealer to ensure equipment reliability

  • Dual rear PTO configuration

  • Available SAE No. 1 power take off with optional SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments.

  • Electronic high pressure common rail

  • Primary fuel filter

  • Secondary fuel filters

  • Fuel transfer pump

  • Electronic fuel priming

  • Oil cooler

  • Oil filler

  • Lube oil filter

  • Oil dipstick

  • Gear driven oil pump

  • Choice of front, rear or center sumps

  • SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.

  • Vibration damper

  • Lifting eyes

Optional Equipment