G3600 ADEM™4 engines provide a wide range of power options to fit your gas compression application. G3600 ADEM™4 engines bring the highest uptime in the industry and long operating intervals between overhaul. Operators that use G3600 ADEM™4 engines in their fleet enjoy virtually no unscheduled downtime, the right power for their application, the lowest operating costs, and emissions compliance. Ideal applications for G3600 ADEM™4 engines include centralized gathering stations, gas processing, transmissions, and storage applications. Cat G3606 ADEM™4 Gen 1 gas engine with ratings: 1398 bkW (1875 bhp) @ 1000 rpm and ADEM™4 Gen 2 gas engine ratings: standard power - 4717 bKW (1900 hp) and uprate power - 1540 bKW (2065 bhp) @ 1000 rpm. NSPS site compliant capable.
Maximum Rating 2065 BHP
Emissions NSPS Site Compliant Capable
Displacement 7762 in³
Minimum Rating 1900 BHP
Aspiration Turbocharged-Aftercooled
Bore 11.8in
Compression Ratio 9.2:1 Gen 1 (7:6:1 Gen 2)
Displacement 7762in³
Emissions NSPS Site Compliant Capable
Flywheel Teeth 255
Ignition, Protection Electronic (ADEM™ A4)
Maximum Rating 2065BHP
Minimum Rating 1900BHP
Oil Change Interval 5000 hours
Rotation from Flywheel End Counterclockwise
Stroke 11.8in
Weight - Dry 36883lb
Cooling System 124gal (US)
Lube Oil System - Refill 187gal (US)
Air cleaner — standard-duty inlet air adapter
A4 control system — provides electronic governing integrated with air/fuel ratio control and individual cylinder ignition timing control
Electrical system and instrumentation certified for Class I, Division 2, Group D hazardous location. Includes entire ADEM A4 system and optional control panel.
Jacket water pump
Jacket water thermostats and housing
Aftercooler/oil cooler pump
Aftercooler/oil cooler thermostats and housing
Two-stage aftercooler
Jacket water heater connections
Standard ANSI connections
Dry exhaust manifolds
Single vertical outlet adapter
Stainless steel encapsulated insulation
SAE standard rotation
Gas admission valves -- electronically controlled fuel supply pressure
A4 control system — senses individual cylinder detonation and controls individual cylinder timing
Crankcase breathers (top mounted)
Oil cooler
Oil filter
Oil pan drain valves -- front and rear
Engine mounting feet (four total)
Electronic shutoff system with purge cycle
Crankcase explosion relief valves
Gas shutoff valve
Air starting system
Paint — Cat yellow
Vibration dampers
Heavy-duty air cleaner with precleaners
35 Amp & 65 Amp charging alternators – CSA approved
Flexible bellows adapters
Exhaust expander
Weld flanges
Fuel filter
Gas pressure regulator
Flexible connection
LCD display panel
Remote data monitoring and speed control
Color HMI display
Compatible with Cat® Electronic Technician (ET) and Data View
Modbus and Ethernet capable
Air or electric motor-driven prelube
Duplex oil filter
RH Service
Lube oil makeup system
Mounting plates (set of four)
Extra mounting feet (set of two)
Extra mounting plates (set of two)
Front stub shafts
Air pressure reducing valve
Engine barring device
Damper guard