Cat Command Remote Console and Station

Remove operators from hazardous jobsite conditions by controlling machines from a safe distance.
Eliminate operator safety risks from potentially dangerous situations including - wall collapses, falling debris, steep slopes, and unstable surfaces.
Lower potential injuries from slips, trips and falls when climbing on and off machines.
Remove operator risk from machine rollover or sliding.

Restart production immediately following disruptive processes, such as blasting in quarry applications.
Operators can quickly and easily switch between Cat Command installed machines, and change jobsite locations, with no downtime.
Reduce operator fatigue by eliminating the in-cab effects of vibration, noise, and rough terrain.
Control the machine with the same response time as sitting in the cab.
Select and activate machine features from the Command Station as though the operator was in the machine.
Allow operators who have had medical concerns to return to work and operate machines earlier.

Available for select Cat dozers, excavators, and wheel loaders.
Allows the user to work safely and comfortably outside the machine, while remaining onsite and in direct visual contact by line of sight.
Provides line-of-sight operation from up to 400 meters (437 yds.) away.
Operator inputs are sent directly to the machine electronics via a dedicated radio transmitter/receiver, resulting in real-time implement control.
Does not require any on-site communications infrastructure.
Uses either a 900 MHz or 2.4 GHz frequency communications protocol.
The machine will shut down if the controller is tipped more than 45 degrees, indicating that the operator has fallen.

NOTE: Command Console is unavailable in Europe, Australia, or New Zealand.

Available for select Cat dozers, excavators and wheel loaders.
Enables the operator to work remotely in a comfortable, seated “virtual cab” with familiar controls and machine displays.
Can be located in a command center onsite or many miles away.
Reduces operator fatigue with a comfortable indoor working environment.
Operator inputs are sent directly to the machine electronics via a dedicated radio transmitter/receiver, resulting in real-time implement control.
Controls deliver the same response time as in the cab, maintaining precise control for all excavator applications.
High-quality video delivers a clear view of the work area.
Operators can easily switch between machines, or change jobsites with no downtime.
Enables trainers to stand beside an operator, without noise or movement.

Cat Command is designed exclusively for – and deeply integrated into – select Cat machines, resulting in system reliability and durability.
Select Cat Command models include easy-to-install Command kits.
Cat Command can be retro-installed on certain existing Cat machines.

* Talk to your Cat dealer for more information about Cat Command.