For tough quarry and mining jobs, rely on the Cat® 735 articulated truck. Its 35.3-ton (32-tonne) payload capacity is pass-matched with excavators and loaders to help you move more material and boost productivity across any jobsite.
Engine Model Cat® C13B
Rated Payload 35.3 ton (US)
Heaped (SAE 2:1) 26.2 yd³
Gross Power (SAE J1995) 436 hp
Bore 5.1in
Displacement 763in³
Engine Model Cat® C13B
Engine Power (ISO 14396) 431hp
Gross Power (SAE J1995) 436hp
Net Power (SAE J1349) 427hp
No Engine De-rating Below 12500ft
Note (1) Advertised power is tested at 1,800 rpm.
Note (2) Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (3) Net power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler, and fan at minimum speed.
Note (4) Net power when the fan is at maximum speed is 319 kW (427 hp) per the SAE reference conditions.
Note (5) Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
Note (6) Diesel exhaust fluid (DEF) used in Cat SCR systems must meet the requirements outlined in ISO 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
Peak Engine Torque Gross (SAE J1995) 1627lbf·ft
Peak Engine Torque Net (SAE J1349) 1612lbf·ft
Peak Engine Torque Speed 1200r/min
Stroke 6.2in
Rated Payload 35.3ton (US)
Heaped (SAE 2:1) 26.2yd³
Struck 20.9yd³
Tailgate Heaped SAE 2:1 28.4yd³
Tailgate Struck 22.2yd³
Forward - 1 5mile/h
Forward - 2 9mile/h
Forward - 3 14mile/h
Forward - 4 22mile/h
Forward - 5 30mile/h
Forward - 6 35mile/h
Reverse - 1 6mile/h
Interior Cab 72dB(A)
Note (1) The declared dynamic operator sound pressure level is 72 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the cooling fan’s maximum speed. The sound level may vary at different cooling fan
Note (2) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Center Axle - Empty 11199lb
Center Axle - Loaded 42005lb
Center Axle - Rated Load 30805lb
Front Axle - Empty 32584lb
Front Axle - Loaded 41522lb
Front Axle - Rated Load 8938lb
Rear Axle - Empty 10692lb
Rear Axle - Loaded 41498lb
Rear Axle - Rated Load 30805lb
Total - Empty 54476lb
Total - Loaded 125024lb
Total - Rated Load 70548lb
Type High strength Brinell HB450 wear resistant steel
Base Plate 0.51in
Front Plate 0.28in
Side Plates 0.43in
Cooling System 21.9gal (US)
DEF Tank 9gal (US)
Engine Crankcase 11.4gal (US)
Final Drives/Differential 33gal (US)
Fuel Tank 105.7gal (US)
Hydraulic System 32.5gal (US)
Output Transfer Gear Box 6.6gal (US)
Transmission 12.4gal (US)
Lower Time 11s
Raise Time 12s
Brakes ISO 3450 – 2011
Cab - FOPS ISO 3449 Level II – 2005
Cab - ROPS ISO 3471 – 2008
Steering ISO 5010 – 2019
Note Dimensions are for machines equipped with 750/65 R25 tires.
Turning Dimensions - Aisle Width 210in
Turning Dimensions - Clearance Radius 318in
Turning Dimensions - Inside Radius 153in
Turning Dimensions - SAE Turning Radius 294in
Turning Dimensions - Steer Angle - Left/Right 45°
Lock to Lock 4.75 seconds @ 60 rpm
Hydraulic Excavators: 336 - Passes 5-6
Hydraulic Excavators: 350/352 - Passes 4-5
Note An optimum system match gives you a major productivity advantage. The 735 is an excellent match for the Cat 350/352 and 336 Hydraulic Excavators; and Cat 972, 966, 962 and 950 Wheel Loaders. Having matched loading and hauling tools results in increased pr
Wheel Loader: 950 - Passes 5
Wheel Loader: 962 - Passes 4-5
Wheel Loaders: 966/966 XE - Passes 4
Wheel Loaders: 972/972 XE - Passes 3-4
Standard and optional equipment may vary. Consult your Cat dealer for details.
Retractable belt: Operator seat and second seat
Touchscreen display incorporating the rearview camera video feed
Windshield wiper and washer, two speed, intermittent (front)
Mirrors: exterior
Windows opening side, tinted
Heater and defroster with four-speed fan
Glass windows:
– Front, laminated and tinted
– Sides and rear, toughened and tinted
Sun visor
Secondary steering – electro hydraulic
Machine operation monitoring system includes:
– Action lamp
– Engine oil pressure
– Primary steering system
– Left and right turn signal
– High beam
– Coolant temperature
– Tachometer
– Parking brake
– Fuel level
– Transmission oil temperature
– Brake system
– Transmission hold
– Hoist control
– Hydraulic system
– Charging system
– Retarder
– Transmission fault
– Traction control system
– Check engine lamp
Air conditioning
Combined gear selection and hoist control lever
Seats:
– Operator: fully adjustable, air suspension
– Trainer: padded with lap belt
Liquid Crystal Display (LCD):
– Alert indicator
– Selected gear and direction
– Speed or auto shift
– Review Operation and Maintenance Manual (OMM)
– Primary steering failure warning
– Seat belt warning
– Secondary steering failure warning
– Diesel Particulate Filter (DPF) regeneration filter
– Secondary steering energy source engaged
– Hour meter
– Retarder active
Storage:
– Cup holder
– Flask receptacle
– Under seat storage
– Door pocket
– Behind operator seat storage
– Coat hook
Tilt and telescopic steering wheel
Adjustable air vents
Product Link Cellular PLE643
Cat® Detect with Stability Assist
Remote starting receptacle (cables not included)
Electrical system: 24-volt, 10A 24- to 12-volt converter
Horn
Lighting systems:
– Cab interior
– Two head lamps
– Two width marker
– Two reversing
– Work light/cab access light
– Two stop/tail lights
– Front and rear direction indicators
Main disconnect switch
Batteries (x2) maintenance free
Cat Clean Emission Module (CEM) and exhaust aftertreatment package
Three axle, six-wheel drive
Auto shift six-speed forward and single-speed reverse transmission
Retarder: engine compression brake and hydraulic
Dual circuit oil immersed, enclosed brakes – all wheels
Cat C13B engine
Differentials: standard with automatic clutched inter- and cross-axle differential locks
Rollover protective structure/Falling objects protective structure (ROPS/FOPS) cab
Rearview camera
Reverse alarm
Crankcase
Front dump body spill guard, integral part of fabricated body
Rear window
Radiator
Vandalism protection: lockable caps
Tires, six 750/65 R25
Mud flaps: wheel arch and body mounted with transportation tiebacks
Scheduled Oil Sampling (SOS) sampling valves
Sound suppression (standard in some countries*)
*Countries are EU countries plus Iceland, Norway, Lichtenstein, Switzerland, Türkiye and UK.
Standard and optional equipment may vary. Consult your Cat dealer for details.
Seat, heated/cooled
Mirrors, heated motorized
Infrared glass – high ambient cab
Window blinds
Radio, Bluetooth® stereo system
Operator seat belt, four-point
Windshield wiper and washer, two speed (rear)
Cat® Payload monitoring system
Product Link Dual PLE683
Operator Coaching
Cold weather start attachment (2 additional batteries)
Engine block heater
Ether start
Flashing LED beacon
Roof mounted LED work lights
Fuel additive – anti-waxing
Scissor tailgate
Exhaust heated body
Cold weather coolant –51° C (–60° F)
Auto lube installation for automatic greasing of bearings
Bare chassis (no body) standard wheel base
Bare chassis (no body) long wheel base
Wheel chocks
Body liners
Fast fuel fill
