C175-16 Generator Set

C175-16 Generator Set

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

  • Standby Rating 3365(no fan)/3250/3100(no fan)/3000 ekW

  • Prime Power Rating 3115(no fan)/3000/2825(no fan)/2725 ekW

  • Emissions/Fuel Strategy Low Fuel, Tier 2

  • Voltage 480 to 13800 Volts

Request a quote

Product Specifications

Specifications

Generator Set Specifications

  • Duty Cycle Standby, Mission Critical, Prime, Continuous

  • Emissions/Fuel Strategy Low Fuel, Tier 2

  • Frequency 60 Hz

  • Maximum Rating 3365 ekW

  • Minimum Rating 2500 ekW

  • Prime Power Rating 3115(no fan)/3000/2825(no fan)/2725 ekW

  • Speed 1800 RPM

  • Standby Rating 3365(no fan)/3250/3100(no fan)/3000 ekW

  • Voltage 480 to 13800 Volts

Engine Specifications

  • Aspiration Turbo Aftercooled

  • Bore 6.89in

  • Compression Ratio 16.7:1

  • Displacement 6456.31in³

  • Engine Model C175-16 SCAC, V-16, 4-Stroke Water-Cooled Diesel

  • Fuel System Common Rail

  • Governor Type ADEM� A4

  • Stroke 8.66in

Generator Set Dimensions

  • Dry Weight - Genset (maximum) 50500lb

  • Dry Weight - Genset (minimum) 42750lb

  • Height - Maximum 134.3in

  • Height - Minimum 87in

  • Length - Maximum 312.9in

  • Length - Minimum 241.6in

  • Width - Maximum 113.7in

  • Width - Minimum 83.1in

Features

Equipment

Standard Equipment

  • 4 x Single element canister with service indicator(s).

  • 2 Programmable relay outputs (Form C)

  • Low coolant level

  • Over/under voltage

  • Coolant temperature

  • Serial annunciator module data link

  • Alarm acknowledge

  • Text alarm/event descriptions

  • Volts (L-L & L-N)

  • Reverse power

  • Over/under frequency

  • Environmental sealed front face

  • Programmable protective relaying functions

  • Speed adjust

  • Generator phase sequence

  • Low coolant temperature

  • Generator mounted - rear facing

  • Overspeed

  • Controls

  • Frequency (Hz)

  • Engine cycle crank

  • Engine cool-down timer

  • Warning/shutdown Indicators:

  • Lamp test

  • 2 Programmable digital outputs

  • 6 Programmable digital inputs

  • High coolant temperature

  • Customer data link (Modbus RTU)

  • Auto/start/stop control

  • Emergency stop pushbutton

  • RPM

  • Digital Indicators

  • Communications

  • Accessory module data link

  • Oil pressure (psi, kPa or bar)

  • Low oil pressure

  • Overcurrent

  • Emergency stop

  • 24 Volt DC operation

  • 4 Programmable relay outputs (Form A)

  • Failure to start (overcrank)

  • True RMS AC metering, 3-phase, +/-2% accuracy

  • Power factor (per phase & average)

  • Operating hours

  • DC volts

  • Amps (per phase & average)

  • Cat ECS 100

  • Reverse reactive power

  • Bolted flange, with bellow for each turbo

  • Exhaust flange outlet

  • Engine mounted filters #REF!

  • Filters x 3

  • 10 Micron spin on yype

  • Secondary/tertiary fuel filters

  • 4 Micron spin on type

  • Primary fuel filter water/fuel water separator

  • Right side extension box, bottom cable entry

  • IEC platinum stator RTDs

  • Reactive droop capability

  • 3 Phase voltage sensing

  • (MV) Busbar connections, right side extension box, bottom cable entry

  • Class F temperature rise at 40C ambient

  • Anti-condensation space heater

  • NEMA Class H insulation

  • 6 Leads

  • Class H temperature rise at 40C ambient

  • Voltage regulator

  • Exciter diode monitor

  • Form wound

  • RFI suppression

  • (LV) Busbar connections, top/center mounted, top cable entry

  • 3 Phase brushless

  • 60 Hz models: NEMA standard hole pattern

  • Permanent magnet excitation (PMG)

  • Min / max exciter limiter

  • Salient pole

  • Redundant shutdown (Overspeed protection through a duplicate speed sensing system)

  • ADEM A4

  • Oil filter, filler and dipstick

  • Integral lube Oil cooler

  • Oil drain lines and valve

  • Fumes disposal

  • Lubricating oil

  • Prelube - required with prime, continuous, and standby

  • Gear type lube oil pump

  • Rails - Engine/generator

  • Rubber anti-vibration mounts - shipped loose

  • Dual 24 volt electric starting motors

  • Battery disconnect switch

  • Batteries and battery rack w/cables

  • Busbar

  • Two PM inspections

  • Paint - Caterpillar yellow with high gloss black rails & radiator

  • SAE standard rotation

  • LH Service

  • Flywheel and flywheel housing-SAE No. 00

Optional Equipment

  • Air inlet adapters

  • Dual element air cleaner

  • Single element air cleaner

  • Air inlet protection

  • Package mounted radiator

  • Automatically selected ground

  • Customer AC-DC connection mounting location - LV/MV

  • Load share governor

  • EMCP 4.4

  • E-Stop

  • Frame boxes

  • Annunciator modules

  • Load share module / auxiliary plate and auxiliary box (LV)

  • Fuel cooler

  • Controller mounting location - LV/MV

  • Modbus monitoring of packages

  • Customer interface options

  • EMCP 4.4 optional harness

  • Controller voltage and current sensing groups

  • Remote radiators

  • Generator harness

  • Interconnect harness

  • Speed adjust

  • Controller and MV and HV power connection locations

  • Raise lower switch

  • Explosive relief valves

  • Crankcase ventilation system

  • Mufflers

  • Exhaust support group

  • Weld flanges

  • Exhaust collectors/manifold

  • Front housing - Prime or continuous

  • Front housing - Standby or mission critical

  • Aftercooler drain

  • Primary fuel filter

  • Low voltage - 1800 and 3000 Frames - 60 Hz, 3 phase, 1800 rpm, FW, PM, No of leads=6, Pitch 0.6667

  • Medium voltage - 1800 and 3000 Frames - 60 Hz, 3 phase, 1800 rpm, FW, PM, No of leads=6, Pitch 0.6667

  • Conversion GP - Top cable entry

  • Low voltage - 1800 and 3000 Frames - 50 Hz, 3 phase, 1500 rpm, FW, PM, No of leads=6, Pitch 0.6667

  • Differential current transformers

  • Space heater kit

  • Medium voltage - 1800 and 3000 Frames - 50 Hz, 3 phase, 1500 rpm, FW, PM, No of leads=6, Pitch 0.6667

  • Thermostat for space heater

  • Generator air intake

  • Pyrometer and thermocouples

  • Drain group oil pans

  • Oil filters

  • Lube oil heater

  • Electric prelube pumps

  • Lubricating oil

  • IBC vibration isolators - Shipped loose

  • Spring type linear vibration isolators

  • Rubber anti-vibration mounts

  • Low voltage connection cable

  • Center post busbarss (LV)

  • 1800 Frame generator side / rear mounted busbars (MV)

  • Enclosures - Control packaging (LV)

  • Paralleling circuit breakers

  • 1800 Frame generators Circuit breaker

  • Neutral ground (LV)

  • Neutral ground (MV)

  • Cable entry options (LV)

  • Cable entry options (MV)

  • Masterpack breakers

  • Power connection covers (LV)

  • Harnesses (Breaker)

  • Masterpack breaker connections

  • Side/rear mounted busbars (LV)

  • IBC seismic Certification

  • Special test charge - Engine only

  • PGS Test report @ 0.8 power factor

  • Genset fuel consumption test

  • Standard genset TVA (Torsional Vibration Analysis) report

  • PGS Test report @ 1.0 power factor

  • OSCOSH1 seismic Certification

  • Custom generator TVA report

  • Generator test report

  • Standard engine test charge

  • Heavy duty battery sets with rack

  • Charging alternators - Dry

  • Air pressure regulator

  • Starter location covers

  • 24 Volt power distribution box

  • 24 Volt electric starting motor

  • 35 Amp Battery chargers

  • 24 Volt battery set - Dry

  • 20 Amp Battery chargers

  • Jacket water heaters

  • 50 Amp Battery chargers

  • Air starting motor

  • Jacket water heater wiring groups

  • Special paint colors

  • Control GP - air powered bar group

  • Barring group manual

  • Service tools - Engine barring group

  • Engine barring air powered