801-974-0511

Cat® C13 Industrial Power Unit

  • Home »
  • New Powers » Cat® C13 Industrial Power Unit
    Order Parts Request Service

    Cat® C13 Industrial Power Unit

    Download Product Brochure
    Email/Share
    Minimum Power
    385.0 bhp
    Maximum Power
    520.0 bhp
    Emissions
    U.S. EPA Tier 4 Final, EU Stage IV Nonroad Emission Standards. Designed to meet proposed EU Stage V Nonroad Emission Standards.
    Rated Speed
    1800-2100 rpm

    Power Rating

    Minimum Power
    385.0bhp
    Maximum Power
    520.0bhp
    Rated Speed
    1800-2100 rpm
    Minimum Power
    385HP
    Maximum Power
    520HP
    Rated Speed
    1800-2100 rpm

    Emission Standards

    Emissions
    U.S. EPA Tier 4 Final, EU Stage IV Nonroad Emission Standards. Designed to meet proposed EU Stage V Nonroad Emission Standards.
    Emissions
    U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 and Korea Tier 4 Final emissions standards

    General

    Engine Configuration
    Inline 6, 4-Stroke-Cycle Diesel
    Bore
    130 mm (5.12 in)
    Stroke
    157 mm (6.18 in)
    Displacement
    12.5 L (762.8 in³)
    Aspiration
    Turbocharged Aftercooled (TA)
    Compression Ratio
    17:1
    Rotation (from flywheel end)
    Counterclockwise
    Cooling System Capacity
    60.7 L (64.2 qt)
    Lube System (refill)
    34 L (35.9 qt)
    Engine Configuration
    Inline 6, 4-Stroke-Cycle Diesel
    Bore
    130 mm (5.12 in)
    Stroke
    157 mm (6.18 in)
    Displacement
    12.5 L (762.8 in³)
    Aspiration
    Turbocharged Aftercooled (TA)
    Compression Ratio
    17.0:1
    Rotation from Flywheel End
    Counterclockwise
    Cooling System - Capacity
    60.7 L (64.2 qt)
    Lube System - Refill
    34 L (35.9 qt)
    Bore
    5.1in
    Stroke
    6.2in
    Displacement
    762.8in³

    Cat Regeneration System Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

    Diameter
    330.2 mm (13 in)
    Width
    779.8-1069 mm (30.7-42.1 in)
    Height
    451.3-654 mm (17.8-25.7 in)
    Weight
    248-259 kg (547-571 lb)

    Cat Regeneration System Aftertreatment Dimensions - Approximate

    Diameter
    330.2 mm (13 in)
    Height
    451.3-654 mm (17.8-25.7 in)
    Weight
    248-259 kg (547-571 lb)
    Width
    779.8-1069 mm (30.7-42.1 in)

    Power Unit Dimensions - Approximate

    Length
    2085-2122 mm (82.1-83.5 in)
    Width
    1157-1247 mm (45.6-49 in)
    Height
    1928-2082 mm (75.9-81.97 in)
    Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
    2085-2304 kg (4596-5080 lb)

    PETU Dimensions - Tier 4 Final Only

    Volume Capacity
    51.1qt (US)

    PETU Dimensions - Tier 4 Final, Stage IV Only

    Volume Capacity
    48.4 L (51.1 qt)
    Length
    854 mm (33.6 in)
    Width
    287 mm (11.3 in)
    Height
    551 mm (21.7 in)
    Weight
    19.42 mm (42.8 lb)

    Passive Regeneration System Aftertreatment Dimensions - Approximate

    Length
    974.8 mm (38.4 in)
    Width
    958.3 mm (37.7 in)
    Height
    547.2 mm (21.5 in)
    Weight
    140 kg (308.6 lb)

    Standard Equipment:

    • Air Inlet System
      • Turbocharged
      • Air-to-Air Aftercooled
      • Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage V)
    • Control System
      • Electronic control system
      • Over-foam wiring harness
      • Automatic altitude compensation
      • Power compensated for fuel temperature
      • Configurable software features
      • Engine monitoring system SAE J1939 broadcast and control
      • Integrated Electronic Control Unit (ECU)
      • Remote fan control
    • Cooling System
      • Vertical or RH thermostat outlet
      • Centrifugal water pump
      • Guidance on cooling system design available through your dealer to ensure equipment reliability
    • Flywheels And Flywheel Housing
      • SAE No. 1 flywheel housing
      • Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage V).
    • Fuel System
      • MEUI injection
      • Primary fuel filter
      • Secondary fuel filters
      • Fuel transfer pump
      • Electronic fuel priming
    • Lube System
      • Open crankcase ventilation system
      • Oil cooler
      • Oil filler
      • Lube oil filter
      • Oil dipstick
      • Gear driven oil pump
      • Choice of front, rear or center sumps
      • Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage V)
    • Power Take Off (pto)
      • SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
    • General
      • Paint: Cat yellow
    • U.s. Epa Tier 4 Final, Eu Stage V Aftertreatment/ Clean Emissions Control Equipment
      • Cat Regeneration System
      • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
      • Aftertreatment Electronic Control Unit (ECU)
      • NOx Reduction System (NRS)
      • Pump Electronic Control Unit (PETU)
      • Selective Catalytic Reduction (SCR)
      • Available in 12V or 24V systems

    Optional Equipment: