Cat® C3.6 Industrial Diesel Engine
|
|
|
|
|
|
|
|
-
Power Rating
-
- Minimum Power
- 74bhp
- Maximum Power
- 121bhp
- Rated Speed
- 2200-2400 rpm
- Maximum Power
- 121HP
- Maximum Torque
- 369lb-ft @ 1500 rpm
- Rated Speed
- 2200-2400 rpm
- Minimum Power
- 74HP
- Minimum Power
- 74HP
- Maximum Power
- 121HP
- Rated Speed
- 2200-2400 rpm
- Maximum Torque
- 369lb-ft @ 1500 rpm
-
Emission Standards
-
- Emissions
- U.S. EPA Tier 3 Nonroad Equivalent Emission Standards (Not Currently EPA Certified). EU Stage IIIA Nonroad Equivalent Emission Standards (Non-Current for EU).
- Emissions
- UN ECE R96 Stage IIIA, Brazil MAR-1
- Emissions
- UN ECE R96 Stage IIIA, Brazil MAR-1
-
General
-
- Engine Configuration
- Inline 4, 4-Stroke-Cycle Diesel
- Bore
- 98 mm (3.9 in)
- Stroke
- 120 mm (4.7 in)
- Displacement
- 3.6 L (220 in³)
- Aspiration
- Turbocharged Aftercooled (TA)
- Compression Ratio
- 17.0:1
- Combustion System
- Direct Injection
- Rotation (from flywheel end)
- Counterclockwise
- Lube System (refill)
- 4 L (1.06 qt)
- Engine Configuration
- Inline 4, 4-Stroke-Cycle Diesel
- Bore
- 3.9in
- Stroke
- 4.7in
- Bore
- 3.9in
- Displacement
- 220in³
- Stroke
- 4.7in
- Compression Ratio
- 17.0:1
- Displacement
- 220in³
- Aspiration
- Turbocharged Aftercooled (TA)
- Combustion System
- Direct Injection
- Rotation from Flywheel End
- Counterclockwise
- Engine Configuration
- Inline 4, 4-Stroke-Cycle Diesel
- Bore
- 98 mm (3.9 in)
- Stroke
- 120 mm (4.7 in)
- Aspiration
- Turbocharged Aftercooled (TA)
- Displacement
- 3.6 L (220 in³)
- Compression Ratio
- 17.0:1
- Combustion System
- Direct Injection
- Rotation from Flywheel End
- Counterclockwise
- Lube System - Refill
- 4 L (1.06 qt)
-
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
-
- Length
- 667 mm (26.3 in)
- Width
- 569 mm (22.4 in)
- Height
- 776 mm (30.6 in)
- Weight, Net Dry (Basic Operating Engine Without Optional Attachments)
- 275 kg (606 lb)
-
Engine Dimensions - Approximate
-
- Height
- 31in
- Width
- 22.2in
- Length
- 26.3in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 840lb
- Length
- 26.3in
- Width
- 22.2in
- Height
- 31in
- Height
- 787 mm (30.98 in)
- Length
- 667 mm (26.3 in)
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 381 kg (840 lb)
- Width
- 564 mm (22.2 in)
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 840lb
Standard Equipment:
-
- Control System
-
- Starter motor (12V or 24V)
- Alternator (12V or 24V)
- Electronic Control Unit (chassis mounted)
- Engine control sensors and robust wiring harness
- Data interface via CANbus J1939
-
- Flywheels And Flywheel Housing
-
- Flywheel housings - SAE 3 or SAE 4
- Choice of flywheel to match industry common hydraulic pumps and transmissions
- Side PTO with SAE A or SAE B interface
-
- Fuel System
-
- Fuel filter - preconnected but chassis mounted
- With water sensor
-
- Lube System
-
- Lubricating oil filters
- High incline oil pan - 35 degrees continuous in all directions
-
- General
-
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request
