988 GC Wheel Loader

988 GC Wheel Loader

The Cat® 988 GC Wheel Loader helps you move more material at a lower cost per hour for a faster return on your investment. This machine offers significant fuel savings and up to 10% lower owning and operating cost than the 988K.

  • Engine Model Cat® C15

  • Rated Speed 2000

  • Peak Power Speed 1600

  • Engine Power - ISO 14396:2002 449 hp

Request a quote

Product Specifications

Specifications

Engine

  • Bore 5.4in

  • Displacement 927in³

  • Emissions U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014

  • Engine Model Cat® C15

  • Engine Power - ISO 14396:2002 449hp

  • Gross Power - SAE J1995:2014 456hp

  • Net Power - SAE J1349:2011 373hp

  • Peak Power Speed 1600

  • Peak Torque - 1,200 rpm - SAE J1995 1778ft·lbf

  • Rated Speed 2000

  • Stroke 6.75in

  • Torque Rise 16%

Operating Specifications

  • Bucket Capacity Range 6.4-7.6 m3 (8.3-10 yd3)

  • Cat Truck Match - High Lift 772/773/775

  • Operating Weight 116858lb

  • Rated Payload - Quarry Face 12.5ton (US)

Transmission

  • Direct Drive - Forward 1 Lock-up disabled

  • Direct Drive - Forward 2 8mile/h

  • Direct Drive - Forward 3 14mile/h

  • Direct Drive - Forward 4 24mile/h

  • Direct Drive - Reverse 1 Lock-up disabled

  • Direct Drive - Reverse 2 9mile/h

  • Direct Drive - Reverse 3 16mile/h

  • Direct Drive - Reverse 4 25.4mile/h

  • Forward - 1 5mile/h

  • Forward - 2 8mile/h

  • Reverse - 1 5mile/h

  • Reverse - 2 8mile/h

  • Transmission Type Cat planetary power shift

Hydraulic System - Lift/Tilt

  • Cylinders, Double Acting - Lift, Bore and Stroke 190 mm x 1216 mm (7.5 in x 48 in)

  • Cylinders, Double Acting - Tilt, Bore and Stroke 170 mm x 722 mm (6.7 in x 28.4 in)

  • Lift/Tilt System 2X x 145 cc Variable displacement piston

  • Lift/Tilt System - Circuit EH - Load Sense

  • Maximum Flow at 2,165 rpm 159gal/min

  • Pilot System Variable displacement piston

  • Relief Valve Setting - Lift/Tilt 4598psi

  • Tilt Cylinder - Stroke 27in

Hydraulic Cycle Times

  • Dump 3s

  • Lower Float Down 4.6s

  • Rack Back 3.8s

  • Raise 7.5s

  • Total Hydraulic Cycle Time - Empty Bucket 18.9s

Hydraulic System - Steering

  • Maximum Flow 52gal (US)

  • Relief Valve Setting - Steering 4000psi

  • Steering Cycle Times - High Idle 3s

  • Steering Cycle Times - Low Idle 5.2s

  • Steering System - Circuit Pilot, load sensing

  • Steering System - Pump Piston, variable displacement

  • Total Steering Angle 70°

Air Conditioning System

  • Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

Axles

  • Front Fixed

  • Oscillation Angle +/-12.5°

  • Rear Trunnion

Brakes

  • Brakes ISO 3450:2011

Operator's Cab

  • ROPS/FOPS ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards

Service Refill Capacities

  • Cooling System 27gal (US)

  • Diesel Exhaust Fluid Tank 5.5gal (US)

  • Differential - Final Drives - Front 49gal (US)

  • Differential - Final Drives - Rear 45gal (US)

  • Engine Crankcase 9gal (US)

  • Fuel Tank 141gal (US)

  • Note Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a

  • Transmission 20gal (US)

Sound Performance - Tier 4 Final/EU Stage V - Standard

  • Machine Sound Level (ISO 6395) 110dB(A)

  • Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.

  • Note (2) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

  • Note (3) The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.

  • Operator Sound Level (ISO 6396) 72dB(A)

Dimensions (Approximate) - High Lift

  • B-Pin Height - Maximum Lift 18.7ft

  • Clearance at Maximum Lift 12ft

  • Front Axle Centerline to Bucket Tip 15.7ft

  • Ground to Lower Hitch Clearance 1.5ft

  • Ground to Top of Exhaust Stacks 13.3ft

  • Ground to Top of Hood 10.7ft

  • Ground to Top of ROPS 13.5ft

  • Maximum Overall Height - Bucket Raised 25ft

  • Maximum Overall Length 39.5ft

  • Note Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires.

  • Reach - Maximum Lift 7.7ft

  • Rear Axle - Centerline to Bumper 10.3ft

  • Wheel Base 12.5ft

Buckets

  • Bucket Capacities 6.4-7.6 m3 (8.3-10 yd3)

Sustainability

  • Recyclability 96%

Features

Equipment

Standard Equipment

  • Standard and optional equipment may vary. Consult your Cat dealer for details.

  • Alarm, back-up

  • Alternator, single 145 amp

  • Batteries, dry

  • Converter, 10/15 amp, 24V to 12V

  • Lighting system (LED, work lights, access and service platform lighting)

  • Starting and charging system, 24V

  • Starter emergency start receptacle

  • Transmission lockout in bumper

  • Hazardous voltage lamp

  • Graphical Information Display, displays real time operating information, performs calibrations and customizes operator settings

  • Air conditioner

  • Cat Vision, rear vision camera system

  • Cab, sound suppressed and pressurized, integrated rollover protective structure (ROPS/FOPS) radio ready for entertainment, includes antenna, speakers and converter (12‑volt 5-amp) and power port

  • Controls, lift and tilt function

  • Heater, defroster

  • Horn, electric

  • Instrumentation, gauges
    – Coolant temperature
    – Engine hour meter
    – Hydraulic oil temperature
    – Power train oil temperature

  • Light, cab, dome

  • Lunchbox, beverage holders

  • CB radio-ready

  • Mirrors, rearview (externally mounted)

  • Seat, Cat Comfort Cloth, air suspension, six-way adjustable

  • Seat belt minder

  • Seat belt, retractable, 76 mm (3 in) wide

  • STIC Control System

  • UV glass

  • Virtual gear indicator

  • Wet-Arm wipers/washers (front and rear)
    – Intermittent front and rear wipers

  • Lights, directional

  • Brakes, oil-cooled, multi-disc, service/secondary

  • Case drain screens

  • Electro hydraulic parking brake

  • Engine, C15 MEUI diesel, turbocharged/aftercooled

  • Ground level engine shutoff

  • Turbine precleaner, engine air intake

  • Starting aid, ether, automatic

  • Throttle lock, electronic

  • Manual switch and automatic fuel priming

  • Cat Production Measurement ready

  • Cat SR Generator/Pump Drive

  • Cat SR Drive Motor

  • Cat Integrated Powered Electronics

  • Automatic retarding controls

  • Automatic bucket lift kickout/positioner

  • Base machine price includes a rim allowance

  • Hydraulically driven demand fan

  • Couplings, Cat O-ring face seals

  • Doors, service access (locking)

  • Ecology drains for engine, radiator, hydraulic tank

  • Fuel tank, 535 L (141 gal)

  • Hoses, Cat XT

  • Hydraulic, steering and brake filtration/screening system

  • Cat Clean Emission Module

  • Oil sampling valves

  • Premixed 50 percent concentration of extended life coolant with freeze protection to –34° C (–29° F)

  • Rear access to cab and service platform

  • Steering, load sensing

  • Toe kicks

  • Vandalism protection caplocks

Optional Equipment

  • Standard and optional equipment may vary. Consult your Cat dealer for details.

  • High ambient cooling – software

  • Optional Cat Production Measurement

  • Optional Engine brake

  • Crankcase guard

  • Cab precleaner

  • Cat Detect, object detection system

  • AM/FM radio

  • Front and rear roading fenders

  • Cold Weather Starting

  • Autolube