Pull-Down Capacity Up to 29 483 kg (65,000 lb)
Hole Diameter 165-250 mm (6.5-9.875 in)
Engine Cat® C27
Bit Load Up to 32 655 kg (Up to 71,993 lb)
Pull-Down Capacity Up to 29 483 kg (65,000 lb)
Bit Load Up to 32 655 kg (Up to 71,993 lb)
Engine Cat® C27
Hole Diameter 165-250 mm (6.5-9.875 in)
Components (1) Dual starter motors
Components (2) Ether starting aid (ether bottle supplied locally)
Emissions: Equivalent to U.S. EPA Tier 4 Final - ISO 14396 872hp
Features Scheduled Oil Sampling (S·O·SSM) ports
Components (1) Coolers with easy cleaning access
Components (2) Separate engine cooling module
Components (3) All cooler core sections are replaceable
Components (4) Automatic variable speed fan control
Features Functional in ambient temperature of 52° C (125° F)
Components (1) Stationary drill deck; for vertical and angle drilling
Components (3) Heavy duty tow hooks (front end)
Components (4) Four (4) lift lugs, for use with cables or chains
Components (5) Fixed access stairs to the cab area
Components (6) Sturdy guardrails with toe guards, self-closing gates
Features (1) Leveling Jacks, A-frame/mast pivot and drill deck are welded integrally to mainframe for maximum durability and long life
Features (2) Primary fuel tank capacity 1416 L (374 gal)
Features (3) Fuel capacity expansion for additional 1416 L (374 gal) optional for total capacity of 2832 L (748 gal); (required for autonomy packages)
Features (4) Three (3) egress points on deck areas in addition to main access
Carrier Rollers Three (3)
Drawbar Pull 93745lbf
Lower rollers Twelve (12)
Model Cat® 336E EL Excavator type
Track chain guards and guides Level two
Travel Speed 1.5mile/h
Triple Grousers (1) 600 mm (23.6 in); for hard rock; 0.88 bar (12.7 psi) ground bearing pressure
Triple Grousers (2) 750 mm (29.5 in); for soft rock; 1.10 bar (15.9 psi) ground bearing pressure
Components (1) Two (2) primary pumps – 145 cc (piston, with proportional electronic controls)
Components (2) One (1) auxiliary circuit pump – 110 cc (piston, load sensing)
Components (3) Two (2) fan pumps – 74 cc (piston, with proportional electronic controls)
Components (4) Two (2) charge pumps – 43.9 + 56.5 cc (double stack gear, fixed displacement)
Components (5) Scheduled Oil Sampling (S·O·S) ports
Variable Grip Hydraulic Break Out Wrench Grip Ranges (1) 114-152 mm (4.5-6.0 in)
Variable Grip Hydraulic Break Out Wrench Grip Ranges (2) 152-216 mm (6.0-8.5 in)
Components (1) Two-piece roller deck bushing
Components (2) Pipe positioner rollers
Components (3) Deck wrench
Components (4) Shock sub
Components (5) Top Sub
Components (6) Hammer Sub
Components (7) Pipe wiper seal
Components (8) Drill tool lubricator is included with selection of DTH Compressor
Components (1) Alloy drill deck covers, for servicing when mast is horizontal
Components (10) Compressor air hoses with safety retention cables
Components (11) Slip resistant surfaces
Components (12) Tow hooks on non-drill-end
Components (13) Lifting lugs
Components (2) Seven (7) engine shut down buttons, by each drill egress/access point, in cab, in engine area, on drill deck
Components (3) Over forty (40) conditional safety interlocks
Components (4) Hinged window guard over the full length of the front drill window
Components (5) Three (3) egress points on deck areas in addition to main access
Components (6) Self-closing gates secure egress ladder locations
Components (7) Electric horn activated by push button in the cab
Components (8) Automatic tram alarm, audible
Components (9) Under deck mounted battery box with keyed battery disconnect/starter disconnect/remote jump start terminals
Feature Approach angle of 15 degrees facilitates loading and unloading on a lowboy
Cab - Premium
– Additional storage
– Leather seat with fabric inlay, heat and ventilation
– Heavy duty seat suspension
– Dual pane window glass
– Removable guard for driller window, plus window facing power train
– Wipers for the driller window plus fron
Cab - Standard
– Fabric seat
– Single pane window glass
– Removable guard for driller window
– Wiper for the driller window
Cab Design
– Spacious FOPS cab is 3 m² (32.3 ft²) with an integrated operator station
– Cab rubber shock-mounts
– Operator station design integrates an ergonomic seat, joystick controls with full instrumentation, and dual 254 mm (10 in) color displays, high de
HVAC
– Floor heating vent
– Roof-mounted air conditioner/heating/pressurizing unit
– Filter access from deck
– Defogging HVAC vents on main window
Lighting
– LED interior lights and map light at operators seat, backlit joysticks and keypads
– Flood lights for the drill perimeter
– Spotlights for power group area; drill deck; mast carousel; access ladder and walkways
– Lighting package includes 4,200
Seating – Seat swivels, locks and retractable, two-point/76 mm (3 in) wide seat belt, tilts (5° adjustment), lumbar support, fore/aft seat adjustment 80 mm (3.1 in)
Windows
– Large windows front, rear and right cab side; full length drill window with guard
– Windshield wipers with a common washer tank
Components (1) All electric controls for drilling, tramming, leveling plus auxiliary functions
Components (10) Rotary head rpm gauge (digital display in screen)
Components (11) Filter indicators for hydraulic, fuel, compressor and engine
Components (12) Jack pressure sensors in display
Components (13) Dust suppression control
Components (14) Mast lock indicator
Components (15) ECM proportional fan speed control system
Components (16) Tram interlock, machine stability limits
Components (17) Tram interlock, pipe in hole
Components (18) Tram interlock, mast up and locked or down and parked
Components (19) Tram interlock, jack retracted
Components (2) Electronic compressor control
Components (20) Tram interlock, winch parked
Components (21) Cab environment controls (AC, filter, heat, fan speeds)
Components (22) Prewired for Terrain and autonomous operation
Components (23)
Drill Assist automated functionality:
– Auto level, auto jack retract
– Auto mast raise and lock, auto mast unlock and park
Components (3) Rotary torque control
Components (4) Virtual rotary head travel stops and interlocks
Components (5) Pipe positioner engaged/disengaged indicator
Components (6) Drill depth meter
Components (7) Drill performance and drill health display system
Components (8) Data logging of machine health with warnings and fault code records with export capability
Components (9) Delayed engine shut down
Compressor - DTH Drilling (1) 38.2 m³/min (1,350 ft³/min) @ 34.4 bar (500 psi)
Compressor - DTH Drilling (2) 42.4 m³/min (1,500 ft³/min) @ 24.1 bar (350 psi)
Compressor - Rotary Drilling 56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi)
Features (1) With the compressor’s variable volume control, the operator can limit air output resulting in reduced fuel consumption
Features (2) Electronic compressor control and regulation
Features (3) DTH selection includes tool oiler
Receiver Tank Choice (1) Low pressure 8.6 bar (125 psi) for ASME/CRN/AU or CE
Receiver Tank Choice (2) High pressure 24.1 or 34.4 bar (350 or 500 psi) for ASME/CRN/AU or CE
Angle Drilling Included with either mast
Mast Accessories Hydraulic - 11.2 m (36.7 ft) Mast One (1) hydraulically actuated pipe catcher, hydraulically operated bit basket
Mast Accessories Hydraulic - 13.6 m (44.6 ft) Mast One (1) hydraulically actuated pipe catcher, plus one (1) wire rope pipe catcher, hydraulically operated bit basket
Mast Accessories Manual - 11.2 m (36.7 ft) or 13.6 m (44.6 ft) Mast One (1) wire rope pipe catcher, manual bit basket
Pipe rack carousel, standard:
– 11.2 m (36.7 ft) Mast: holds quantity of four (4) 10.6 m (35 ft) pipes
– 13.6 m (44.6 ft) Mast: holds quantity of four (4) 6.1 m (20 ft) pipes
Batteries, Sealed (1) Quantity: Four (4)
Batteries, Sealed (2) Quantity: Six (6) (required for cold weather Level 2 and 4 and/or semi autonomy packages)
Features (1) Mast configurations complete with pipe rack carousel and angle drilling package (vertical, out to 30 degrees in 5-degree increments)
Features (10) Drill pipe positioner
Features (11) Rotation gear box with single motor up to 160 rpm, up to 11 700 N∙m (8,629 lbf-ft) torque
Features (2) Hydraulically actuated, self-indexing pipe rack carousel accepts pipe diameters from 127 mm (5.0 in) to 194 mm (7.625 in)
Features (3) Drill strings configured for bit changes (above the deck)
Features (4) Single Hydraulic Cylinder and cable system for pulldown/hoist
Features (5) Auto tensioning of pull down and hoist cables
Features (6) Variable grip hydraulic break out wrench for range of pipe diameters
Features (7) Sliding deck wrench assembly
Features (8) Configured with roller deck bushing for tricone applications, two-piece deck bushing for DTH
Features (9) Closed circuit camera in mast is used to view pipe rack carousel/top drive operation while racking pipes
Components (1) One-piece roller deck bushing
Components (2) Pipe positioner rollers
Components (3) Deck wrench
Components (4) Top sub
Components (5) Bit sub
Components (6) Pipe wiper seal
Components (1) Spindle – 140 mm (5.5 in) API regular thread with splined collar
Components (2) Rotary torque control
Components (3) Virtual rotary head travel interlocks
Rotation Speed 0-160 rpm
Torque - Single Motor 8629lb/ft
Components (1) Drill depth indicator
Components (2) Product Link™ Elite (hardware from factory, subscription package via dealer)
Type (1) Cat Terrain ready
Type (2) Autonomy ready
Choices (1)
Water injection – tank mounted below front deck 1271 L (336 gal)
– Water flow meter, volume control, tank fill level indicator
Choices (2)
Water injection plus dry dust collector 127 m³/min (4,500 ft³/min) dust collector; includes standard water injection
– Self-cleaning filters, dust chute with ejector
Choices (3)
High volume water injection (maximum) – tanks total capacity 2786 L (736 gal)
– Tank below deck (isolated for extreme cold weather) capacity 1271 L (336 gal)
– Tank above deck capacity 1514 L (400 gal)
Choices (4) Static dust curtains, four sided/boxed enclosed
Package (1) Fast fill for fuel and water, automated lubrication system
Package (2) Service center for lubricant drain and fill, automated lubrication system, fast fill fuel and water, blow down hose (option)
Working Weight Range 56 468 kg to 64 154 kg (124,490 lb to 141,436 lb)
Emissions: Equivalent to Tier 2, Engine Power C27 @ 1,800 rpm
Emissions: Equivalent to Tier 4 Final, Engine Power C27 @ 1,800 rpm
Compressor (2,000 ft³/min, 125 psi) – Rotary drilling package, 56.6 m³ (2,000 ft³/min) at 8.6 bar (125 psi); with low pressure receiver tank for ASME/CRN/AU or CE
Standard – Includes a fabric seat, single pane window glass, removable driller window guard, and a windshield wiper for driller window
Drill depth indicator and interlocks, auto-level, auto-mast
Machine access via fixed stairs
11.2 m (36.7 ft) or 13.6 m (44.6 ft): Pipe catcher, manual – one wire rope (for 11 m), two wire rope (for 13 m) pipe catcher, bit basket, manual
Batteries, sealed quantity four (4)
Level 1 – Standard fluids and lubricants. With a temperature range of –1° C (30° F) to 52° C (125° F)
Decals, ISO
Certifications, EAEU
Certifications, CE
Triple grousers 600 mm (23.6 in); for hard rock 0.88 bar (12.7 psi) ground pressure
Triple grousers 750 mm (29.5 in); for soft rock 1.10 bar (15.9 psi) ground pressure
Compressor (1,350 ft³/min, 500 psi) – DTH drilling package, 38.2 m³ (1,350 ft³/min) at 34.4 bar (500 psi), with high pressure receiver tank (500 psi) for ASME/CRN/AU or CE; includes hammer storage and 113.5 L (30 gal) hammer lubrication system
Compressor (1,500 ft³/min, 350 psi) – DTH drilling package, 42.4 m³/min (1,500 ft³/min) @ 24.1 bar (350 psi) with high pressure receiver tank for ASME/DRN/AU or CE; includes hammer storage and 113.5 L (30 gal) hammer lubrication system
Premium – Includes a leather seat with fabric inlay, heat and ventilation, heavy duty suspension, dual pane window glass. Removable driller window guard and guard for window facing power train. Additional storage box and windshield wipers on front and rear windows
LED Lighting Package:
Provides 4,200 lumens flood light on perimeter, area spotlights have 1,950 lumens. Mast clearance lights and cab mounted yellow strobe light and a front mounted tram beacon
Foldaway trainer’s seat with retractable seat belt
Window shades
Cabin pressure manometer gauge
Cab roof access system (includes ladders, cage and rails)
Overhead winch assembly with cable and hook, plus with remote control; variable speed drive with ≥ 1814 kg (4,000 lb) rating, length to reach 6.1 m (20 ft) past drill deck
Tool lubrication system for Rotary Drilling with 113.5 L (30 gal) capacity
Pipe thread greaser with reloadable tank for disposable grease bucket
Drill Assist
Tool box in deck
Hydraulic viewing hatch with spotlight
Product Link (Cellular)
Product Link (Dual: Satellite and Cellular)
Terrain for Drilling (guidance system)
Fold up trainer’s seat with seat belt
Cabin pressure manometer gauge
Window shades
Fuel tank expansion adds 1416 L (374 gal) tank for a total capacity of 2832 L (748 gal); required for autonomy packages
Machine access via cascading, hydraulic stairs; includes walkway around cab to drill deck
Fire suppression ready; platform to mount fire suppression bottles and/or diesel gen set
Jib crane ready (mounting kit only)
Toolbox
11.2 m (36.7 ft) Mast: Pipe catcher, hydraulic – one hydraulically actuated pipe catcher, bit basket, hydraulic
13.6 m (44.6 ft) Mast: Pipe catcher, hydraulic – one hydraulically actuated pipe catcher, plus one wire rope pipe catcher, bit basket, hydraulic
Variable grip hydraulic break out wrench range 114 mm to 152 mm (4.5 in to 6.0 in)
Variable grip hydraulic break out wrench range 152 mm to 216 mm (6.0 in to 8.5 in)
Fast fill for fuel and water and automated lubrication system
Central drain/fill service center for lubricants, fast fill for fuel and water, a blow-down hose and automated lubrication system
Bushing retention tool – 102-194 mm (4.0-7.625 in)
Lifting bails: API thread 89 mm (3.5 in)
Lifting bails: API thread 114 mm (4.5 in)
Lifting bails: API thread 140 mm (5.5 in)
Lifting bails: BECO thread 102 mm (4.0 in)
Lifting bails: BECO thread 114 mm (4.5 in)
Lifting bails: BECO thread 152 mm (6.0 in)
Batteries, sealed quantity six (6) (required for cold weather Level 2 and 4 and/or semi autonomy packages
Dust curtains, four sides boxed in, with hydraulic lifters to raise front and rear dust curtains (recommended with dust collector)
Tram off spray system
Water injection 1271 L (336 gal) plus dry dust collector 127 m³/min (4,500 ft³/min)
Water injection, high volume 2786 L (736 gal)
– Tank below deck (isolated for extreme cold weather) capacity 1271 L (336 gal)
– Tank above deck capacity 1514 L (400 gal)
Pipe carousel 11.2 m (36.7 ft) mast / 10.6 m (35 ft) pipe rack holds quantity of four
Pipe carousel 13.6 m (44.6 ft) mast / 6.1 m (20 ft) pipe rack holds quantity of four