The PM313 is an efficient, highly maneuverable milling machine with a cutting width of 1300 mm (51.2 in) that performs controlled full-depth removal of asphalt and concrete pavements in a single pass.
Milling Width 51.2 in
Rated Power 336.6 hp
Operating Weight 47115 lb
Maximum Milling Depth 13 in
Maximum Milling Depth 13in
Milling Width 51.2in
Number of Bits 111
Rotor Speeds 97 / 109 / 121 rpm
Engine C9.3
Maximum Milling Speed 108ft/min
Maximum Travel Speed 4.7mile/h
Rated Power 336.6hp
Operating Weight 47115lb
Transport Weight 43561lb
Conveyor Swing 60 degrees from center
Height - Canopy 12.3ft
Maximum Truck Clearance 15.42ft
Minimum Left Cutting Radius 13.88ft
Minimum Right Cutting Radius 6.56ft
Operating Length - Conveyor Up 36.45ft
Operating Width 8.33ft
Transport Height 9.84ft
Transport Length 30.58ft
Transport Width 8.33lb/in
Cooling System 16.4gal (US)
Diesel Exhaust Fluid (DEF) Tank 5.8gal (US)
Engine Oil 7.9gal (US)
Fuel Tank 158.5gal (US)
Hydraulic Tank 15.6gal (US)
Water Spray System Tank 332.9gal (US)
Sliding operator station
Suspension seat
Ground control keypad
Single high-resolution LCD touchscreen display
12-volt power receptacle
Remote Troubleshoot capability
Cat Product Link
Cat GRADE
Material removal boost feature
Automatic plunge-cut
Automatic transition feature
Obstacle jump
Three cutting speeds
System K Rotor - Standard (15 mm)
Auto engine idle control
High capacity cooling system
Automatic load control
Wheel undercarriage
Traction control
Ports for Scheduled Oil Sampling (S·O·S℠)
Platform-level engine oil dipsticks
1260 L (333 gal) onboard water tank
Side water fill valve
Water spray system
Platform handrails
Signaling/warning horn
Halogen work lighting
Additional high-resolution LCD touchscreen display
Powered canopy
Windscreens
Remote camera with cut edge guidance
Sonic sensor (averaging or string line)
Ground level grade controls
Dust abatement system
Hydraulic folding conveyor
Remote camera (loading conveyor)
System K Rotor - Course (18 mm)
System K Rotor - Fine (8 mm)
Diamond bits
Pneumatic bit removal tool
Tool holder extractor
Rotor turning device
Ballast kit
Track undercarriage
CE certificate
Air compressor
Accessory drive system
High pressure washdown
Low pressure washdown
Additional water spray system
Remote Flash
LED work lighting (fixed, pole mounted, magnetic)
Warning beacon (fixed)
Truck signal lights
Roading Lights
Remote cameras (rear, front, cutting edges)
