Longer description goes here
Engine Model Cat® C32B
Gross Power - SAE J1995 1025 HP
Water Tank Capacity up to 75 700 L (20,000 gal)
Engine Speed 1800 r/min
Bore 5.7in
Cylinders 12
Displacement 1959in³
Emissions Fuel Optimized
Engine Model Cat® C32B
Engine Speed 1800r/min
Gross Power - SAE J1995 1025HP
Net Power - SAE J1349 916HP
Note (1) Net Power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator with engine speed at 1,800 rpm.
Note (2) Power rating applies at 1,800 rpm when tested under the specified condition for the specified standard.
Note (3) Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
Note (4) No engine derating required up to 2286 m (7,500 ft) for Tier 4/Stage V.
Note (5) Available as Tier 4 Final/Stage V equivalent, Tier 3/Stage IIIA equivalent, or Tier 2/Stage II equivalent emission standards.
Stroke 6.4in
Empty Machine Operating Weight (without water / with fuel) 160,307 - 162,323 lb / 72 714 - 73 629 kg
Machine Weight (with water tank full) 327,964 - 327,964 lb / 147 172 - 148 762 kg
Note Multiple tank configurations are offered based on customer preference and regional locations. Water Tank Capacity Range: 75 400 - 75 700 L (19,900 - 20,000 gal)
Note (1) Cat branded tanks include additional features and options commonly selected by customers in the industry. Splash guards, fill chute, and rock ejectors are standard.
Note (2) Hoist cylinder mounting on all tank offerings enhances serviceability.
Water Tank - Max Empty Weight (no WDS) 42,983 - 44,092 lb / 19 497 - 20 000 kg
Water Tank Capacity up to 75 700 L (20,000 gal)
Note Water Tank Capacity Range: 69 700 - 75 700 L (18,400 - 20,000 gal)
Note (2) Operator selectable coverage: 0.2-0.8 L/m² (4 kph - 40 kph) / 0.5-0.2 gal/ft² (3 mph - 25 mph)
Top Speed - Loaded 41.7mile/h
Chassis Weight 115217lb
Target Gross Machine Weight 363000lb
Brake Standards ISO 3450:2011
Brake Surface - Front 6331in²
Brake Surface - Rear 15828in²
Body Lower Time - Float 13s
Body Lower Time - High Idle 13s
Body Raise Time - High Idle 15s
Pump Flow - High Idle 6331gal/min
Relief Valve Setting - Lower 500psi
Relief Valve Setting - Raise 2750psi
Empty Loaded Cylinder Stroke Front 2.9in
Empty Loaded Cylinder Stroke Rear 2.5in
Rear axle - Oscillation 5.4°
Steer Angle 30.5°
Steering Standards ISO 5010:2007
Turning Circle - Clearance Diameter 93ft
Turning Diameter - Front 83ft
Note (1) Productive capabilities of the 777 truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production.
Note (2) Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection.
Standard Tire 27.00R49 (E4)
Brake Hoist System 85gal (US)
Cooling System 63.4gal (US)
Crankcase 28.7gal (US)
Differentials 59.9gal (US)
Final Drive - Each 20gal (US)
Fuel Tank (1) 300gal (US)
Fuel Tank (2) 350gal (US)
Steering System - Including Tank 14.1gal (US)
Torque Converter - Transmission System 36.5gal (US)
Air Conditioning 18390Btu/lb
FOPS Standards Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria.
Heater / Defroster 43930Btu
Note (1) The operator Equivalent Sound Pressure Level (Leq) is 73 dB(A) when SAE J1166 FEB2008 is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with t
Note (2) The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88:2008, mid-gear moving operation is 83 dB(A).
Note (3) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
ROPS Standards (1) Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.
Maximum cannon spray distance 200ft
Maximum number of front/side spray heads 0
Maximum number of rear spray heads 5
Maximum size debris flushed through spray head 0.75in
Maximum water flow 1200gal(US)/min
Maximum water from cannon (high idle) 1250gal(US)/min
Maximum water from cannon (idle) 600gal(US)/min
Minimum number of front/side spray heads 2
Minimum number of rear spray heads (recommended 3) 2
Note Operator selectable coverage: 0.2-0.8 L/m² (4 kph - 40 kph) / 0.05-0.2 gal/ft² (3 mph - 25 mph). Coverage rates above 0.6 L/m² may not be available at higher speeds depending on head count and configuration.
Note (1) Opening is automatically controlled by the system to achieve AutoMode Coverage or Manual Mode Flow Rate.
Note (2) AutoMode Spray controls water coverage automatically to the number of heads being used and ground speed achieved.
Note (3) Manual Mode allows the operator to set a water flow rate that is constant regardless of ground speed.
Note (4) Spray Heads on competitive water distribution systems require tools and maintenance to change flow and spray pattern. Caterpillar is the only company to have variable active spray heads to regulate water spray.
Note (5) Water flow is continually adjusted during operation to conserve water and achieve desired coverage and flow rate
Spray head opening range (maximum) 0.75in
Spray head opening range (minimum) 0.04in
Spray system hydraulic tank capacity 7.25gal (US)
Type Wet water pump/hydraulic motor coupling
Water per spray head (maximum) 600gal(US)/min
Water per spray head (minimum) 35gal(US)/min
Front Axle - Empty 46%
Front Axle - Loaded 33%
Rear Axle - Empty 54%
Rear Axle - Loaded 67%
Forward - 1 6.6mile/h
Forward - 2 9.1mile/h
Forward - 3 11.9mile/h
Forward - 4 16.6mile/h
Forward - 5 22.5mile/h
Forward - 6 30.2mile/h
Forward - 7 40.9mile/h
Note Maximum travel speeds with standard 27.00R49 (E4) tires.
Reverse 7.5mile/h
Differential Ratio 2.736:1
Planetary Ratio 7.0:1
Total Reduction Ratio 19.1576:1
Standard and optional equipment may vary. Consult your Cat dealer for details.
Autostall
Engine idle shutdown
Air-To-Air Aftercooler (ATAAC)
Air cleaner with precleaner (2)
Automatic cold mode idle control
Electric priming pump
Electric cold weather start (two starters and four batteries)
Ether starting aid
Exhaust, muffler
Fuel filter/water separator
Turbocharger (2)
Braking system:
– Extended Life Brakes
– Brake wear indicator
– Automatic Retarder Control (ARC) (utilizes oil-cooled, multiple disc brakes)
– Brake release motor (towing)
– Manual retarder (utilizes oil-cooled, multiple disc brakes)
– Oil-cooled, multiple disc (front/rear)
– Parking
– Secondary
– Service
Transmission
– Auto neutral idle
– APECS Software
– ECPC
Part Throttle Shifting
– 7-speed automatic powershift with Torque Shift Management Electronic Clutch Pressure Control
– Body up-shift inhibitor
– Directional shift management
– Downshift inhibitor
– Neutral start switch
– Neutral coast inhibitor
– Reverse shift inhibitor
– Reverse neutralizer during dumping
– Programmable top gear selection
Suspension, rear
Alarm, backup
Alternator, 115 ampere
Auxiliary jump start receptacle
Batteries, maintenance-free, 12V (4), 190 amp-hour
Electrical system, 25 AMP, 24V to 12V converter
Lighting system
– Backup light (halogen)
– Directional signals/hazard warning, (front and rear LED)
– Headlights, (halogen) with dimmer
– Payload, indicator lights
– Operator access courtesy lights
– Side profile lights
– Stop/tail lights (LED)
– Service lights
Air conditioning
Ashtray and cigarette lighter
Coat hook
Cup holders (4)
Diagnostic connection port, 24V
Entertainment Radio Ready
– 5 amp converter
– Speakers
– Antenna
– Wiring harness
Gauges/indicators
– Brake oil temperature gauge
– Coolant temperature gauge
– Hour meter
– Tachometer
– Engine overspeed indicator
– Fuel level
– Speedometer with odometer
– Transmission gear indicator
Heater/defroster (11 070 kCal/43,930 BTU)
Auto temp control
Fluid level monitoring
Hoist lever
Horn, electric
Light – dome
Light – courtesy
Load counter, automatic
Advisor display
VIMS
TPMS
Foot rest
Mirrors – heated
Power port, 24V and 12V (2)
ROPS cab, insulated/sound suppressed
Cat Comfort Series III
– Full air suspension
– Retractable 3-point seat belt with shoulder harness
Steering wheel, padded, tilt and telescopic
Storage compartment
Sun visor
Throttle lock
Window, right side, hinged access/egress
Electric left side window control
Windshield wiper (intermittent) and washer
Tinted, laminated glass
Adaptive economy mode
Object detection (4 cameras, 4 radars)
Product Link™ Ready (Level 1)
TKPH/TMPH (Tons Kilometer Per Hour/ Tons Mile Per Hour)
Work Area Vision System (WAVS)
Cat MineStar Edge™: Level 1 - Basic (Equipment Tracking)*
*Basic connectivity package comes standard on all Cat Water Solutions trucks with a 6-month complimentary service-based offering
Engine crankcase
Driveline
Fan and A/C
Extended Life Coolant to –35° C (–30° F)
Body mounting group
Body safety pin (secures body in up position)
Body down indicator
CD-ROM parts book
Center-mounted rims
Fuel tank (1136 L/300 gal)
Ground level battery disconnect
Ground level engine shutdown
Ground level grease fittings
Reservoirs (separate)
– Brake/hoist
– Steering
– Transmission/torque converter
Rims 19.5 × 49
Rock ejectors
Supplemental steering (automatic)
Tie down eyes
Tow hooks (front)/Tow pin (rear)
Vandalism protection locks
Wiggins fast fuel
Traction Control System (TCS) (new version)
Attachment Zone
Controls: Factory installed and integrated into cab
Water System Monitor: integrated into cab, programmable spray configurations, automatic diagnostic messages
Variable Hydraulic Pump Drive: 1,200 gpm at speeds of 3 to 25 mph with auto shut-off and soft startup
Stainless Steel Spray Heads: maintenance free, patented design resists corrosion
Independent Hydraulic Cooling System: minimizes overheating
Water Cannon: hydraulically controlled, integrated joystick with cab controls, optional nozzles
Parts & service available through global Cat dealer network
Cat branded tanks include additional features and options commonly selected by customers in the industry.
– Splash guards, fill chute, and rock ejectors are standard.
– Hoist cylinder mounting on all tank offerings enhances serviceability
– Manufactured and supplied by recognized tank providers (covered by a Caterpillar warranty)
Standard and optional equipment may vary. Consult your Cat dealer for details.
Cab precleaner
Cat Engine Brake
Clustered grease fittings
Cold weather packages
Fluid fill service center
HID lights
Mirrors, convex
Mirrors, heated
Spare rim
Visibility package (meets ISO 5006 requirements)
Wheel chocks
Work Area Vision System (WAVS)
Cat MineStar Edge™: Level 2 - Premium (Production Recording)**
**Phased introduction 2022
