The Cat 950 Wheel Loader brings premium performance with simple-to-use technologies as a standard offering, boosting operator efficiencies and delivering consistent high bucket fill factors resulting in increased productivity. Extended service intervals lower maintenance costs. This machine is designed to meet emission standards without interrupting operation.Improved performance, reliability, durability, and versatility result in a machine that is built to meet your needs.
Maximum Power - 2,100 rpm - ISO 14396 249 HP
Operating Weight 42461 lb
Engine Model Cat C7.1
Note Weight based on a machine configuration with with Parallel lift z-bar linkage, Bridgestone 23.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, front manual differential/open r
Displacement 427in³
Engine Model Cat C7.1
Engine Torque @ 1,300 rpm - ISO 14396:2002 908ft·lbf
Gross Torque @ 1,300 rpm - SAE J1995:2014 916ft·lbf
Maximum Gross Power - 2,100 rpm - SAE J1995 253HP
Maximum Net Power - 2,100 rpm - ISO 9249 231HP
Maximum Net Torque - 1,300 rpm - ISO 9249 863ft·lbf
Maximum Power - 2,100 rpm - ISO 14396 249HP
Note Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
Note (1) The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
Note (2) Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lowercarbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hy
Note Weight based on a machine configuration with with Parallel lift z-bar linkage, Bridgestone 23.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, front manual differential/open r
Operating Weight 42461lb
Forward - 1 4.3mile/h
Forward - 2 7.5mile/h
Forward - 3 12mile/h
Forward - 4 16mile/h
Forward - 5 24.5mile/h
Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius
Reverse - 1 4.3mile/h
Reverse - 2 7.5mile/h
Reverse - 3 16mile/h
Exterior Sound Power Level - ISO 6395:2008 70dB(A)
Exterior Sound Power Level - ISO 6395:2008 ¹ 107dB(A)
Note ¹Including countries that adopt the EU and UK Directives.
Note (1) ¹Exterior Sound Power Level - European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701
Operator Sound Pressure Level - ISO 6396:2008 70dB(A)
Operator Sound Pressure Level - ISO 6396:2008 ¹ 69dB(A)
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons).
Breakout Force 40690lbf
Note For a machine configuration as defined under “Weight.”
Note (1) Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. Service Refill Capaciti
Static Tipping Load - Full 40° Turn - No Tire Deflection 26369lb
Static Tipping Load - Full 40° Turn - With Tire Deflection 24694lb
Cooling System 14.3gal (US)
Crankcase 5.5gal (US)
DEF Tank 4gal (US)
Differential - Final Drives - Front 11.4gal (US)
Differential - Final Drives - Rear 11.4gal (US)
Fuel Tank 68.6gal (US)
Hydraulic Tank 25.6gal (US)
Transmission 11.4gal (US)
Hydraulic Cycle Time - Total 9.1s
Implement System - Maximum Operating Pressure 4250psi
Implement System - Maximum Pump Output at 2,340 rpm 85gal/min
Ground Clearance 1.08ft
Height - Top of Hood 8.83ft
Height - Top of ROPS 11.33ft
Hinge Pin Height at Carry Height 2ft
Hinge Pin Height at Maximum Lift 13.08ft
Lift Arm Clearance at Maximum Lift 10.67ft
Note All dimensions are approximate and based on machine equipped with 3.1 m3 (4.1 yd3 ) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires.
Overall Length - Without Bucket 23.08ft
Rack Back - Carry Height 49°
Rack Back - Maximum Lift 59°
Tread Width 7ft
Wheel Base 11ft
Width over Tires (Loaded) 9.33ft
Ground Clearance 1.08ft
Height - Top of Hood 8.83ft
Height - Top of ROPS 11.33ft
Hinge Pin Height at Carry Height 2.5ft
Hinge Pin Height at Maximum Lift 14.75ft
Lift Arm Clearance at Maximum Lift 11.83ft
Note All dimensions are approximate and based on machine equipped with 3.1 m3 (4.1 yd3 ) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires.
Overall Length - Without Bucket 24.58ft
Rack Back - Carry Height 49°
Rack Back - Maximum Lift 56°
Tread Width 7ft
Wheel Base 11ft
Width over Tires (Loaded) 9.33ft
Standard and optional equipment may vary. Consult your Cat dealer for details.
Lights: halogen, 4 work lights, 2 front roading lights with turn signals, 2 rear-vision lights
Starting and charging system, 24V
Starter, electric, heavy duty
Steering system, load sensing with dedicated variable displacement piston pump
Implement system, load sensing with variable displacement piston pump
Oil sampling valves, Cat XT™ hoses
Ride control, dual accumulators
*Not all configurations available in all regions, subject to availability
Kickouts: lift and tilt
Parallel Lift, Z-bar*
Primary touchscreen monitor (Cat Payload, quad screens, machine settings & messages)
Front dash with analog gauges, LCD display, and warning lights
Cat Payload scale
Application Profiles
Operator ID & machine security
Autodig with Auto Set Tires
Job Aids
Cab, pressurized, sound suppression
HMU steering wheel
Visibility: mirrors, rear-vision camera
Window, front, laminated
Window cleaning platform, front
Touchscreen display
Air conditioner, heater, defroster (auto temp, fan)
EH implement controls, parking brake
Sun visor, front and rear, retractable
Seat, cloth, air suspension
Fuel-water separator and secondary fuel filter
Service brakes, hydraulic, fully enclosed wet disc, wear indicators, Integrated Braking System (IBS)
Engine, air precleaner
Park brake, caliper on front axles, spring applied–pressure released
Transmission, countershaft, automatic powershift
Axles, front differential lock
Torque converter with lock-up
Electric fuel priming pump
Cat C7.1 engine
Standard and optional equipment may vary. Consult your Cat dealer for details.
Guards: power train, crankcase, cab, cylinders, rear
Cat Autolube system
Fenders, extensions or roading
Wheel chocks
Toolbox
Secondary steering system, electrical**
**Standard or optional depending on region. Consult your dealer.
Biodegradable hydraulic oil
High-speed oil change system
Rear cab access
Cold start, 120V or 240V
Warning beacon
Lights: LED
Reversing strobe lights
3rd and 4th auxiliary functions with ride control
Quick coupler control
*Not all configurations available in all regions, subject to availability
Standard lift, Z-bar*
High Lift available with both linkages*
Cat Payload Printer
Controls Help and eOMM
Cat Advanced Payload
Mirrors, heated
Dedicated rearview screen
Entertainment radio
Seat, leather/cloth, air suspension, heated/cooled
Full cab window guard
Windows, front, heavy duty
Steering, joystick
Cat Detect rear radar system
CB radio ready
Door, remote opening system
Multiview (360°) vision system
Seat, suede/cloth, air suspension, heated
Turbine, air precleaner
Axles, ecology drains, AOC ready, extreme temperature seals
Radiator, high debris
Axles, auto differential locks front and rear
Axles, oil cooler
Cooling fan, reversible
Tunneling***
Corrosion resistant
Auxiliary Counterweight
***Japan only
Waste and industrial
Forestry
